Store | Gadget

Multi purpose chest - Treasure Box

$ 2.59

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

I made a treasure chest which appeared frequently in pirate movies. The inside is made to be able to print at once using the hinge structure not to be assembled.
In this internal structure, it is challenged to print the oblique angle instead of the vertical according to the feature of the treasure box shape having various angles unlike the former one.
As the angle of the hinge becomes possible, the possibility of applying to more various forms has opened.

The outer lid requires a lot of support, so be careful when printing.

It can be used to store small things, such as a desk clip, a post-it, or a thumb drive. If you want to keep something special, you can use it to fit the size.


In the form of this box, it will be very popular when used for children's play or Halloween.

XYZ - 77 x 56 x 60mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 4.9 MB
Recommend Print
Replicator 2
Ultimaker 3
Ultimaker 2+
Material Color
All
Average Time
[0.1mm] 21h

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !