multipurpose chest - Police box

$ 3.49

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

I made a British Police box as a follow-up to the public phone booth I had built before. British Police box is one of the symbols of British culture. Especially, it became more widely known as "Doctor Who", which was used as a transcendental construction device in science fiction drama.
Unlike the public telephone booth that we had already built, this time we adopted the folding method. You can open and close the door, unlike the actual Police box, you can open both doors. And you can open and close a small door. These doors are designed to open outward but not inward.

When printing and folding, use a heat gun or a hair dryer to smoothly fold it without breaking it.

It can be used as an interior accessory, or as a place to put small items on the desk.

Making Process Ender 3 pro
Making Process Prusa i3 mk3

When expanded, size = X 193mm, Y 190mm, Z 33mm After folding X 58mm, Y 58mm, Z 125mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : NO / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : NO / Brim : NO / Support : NO
File
File 2.6 MB
Average Time
[0.1mm] 15h
  • super3dprints2226 Prusa i3 Mk3/Mk3sPrusaSlicer
    2021-02-04 10:44:18

    Please consider reworking the hinge on the panels. They are very difficult to bend in. By doing so, they cracked in another place.

    jsh7891 Prusa i3 Mk3/Mk3sPrusaSlicer
    2021-02-04 11:16:56

    @super3dprints2226
    Thanks for the comments. We will find ways to improve.

  • tommck Prusa i3 Mk3/Mk3sPrusaSlicer
    2020-11-22 21:48:03

    You should mark this as "Rafts: NO"... removing a raft (which I enabled for my print) is VERY hard with such a large flat area to remove it from

    fab365 Administrator
    2020-11-23 09:28:45

    Thank you very much for your suggestion.
    Depending on the various factors (manufacturer, storage condition, climate) of the filament, it may or may not fall off easily.
    We will consider and reflect your opinion internally.

  • DareBakCZE
    2020-11-02 18:42:23

    Please update the description where it says 'Especially, it became more widely known as "Doctor Who", which was used as a transcendental construction device in science fiction drama.'

    It is known as T.A.R.D.I.S. and 'Doctor Who' is a name of the British TV show, not the box itself.

  • Intelekt Creality Ender-3Cura
    2020-02-22 09:22:51

    Do you have the slicer settings for an Ender 3 in CURA please?

    fab365 Administrator
    2020-11-23 09:22:42

    Hi Intelekt.
    You can download the slicer setting file on fab365 profile page.
    https://fab365.net/my/profile

    The below help page will guide you how to download slicer settings.
    https://fab365.net/help/43/how-to-download-slicer-setting

    And the below help page is about how to import settings.
    https://fab365.net/help/29/how-to-import-fab365-cura-profile

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !