Desk light design in form of street light.
Part05 should be output in vase mode(Top, Bottom Layer = 0, Shell = 1) in a slicing program in order to output as thin and transparent as possible.
The need for additional components to use as light.
Required parts are light emitting diode 2pin (3mm or 5mm), 2pin connector, resistor, usb cable is required.
You can use it by connecting it to USB so connect it to a notebook or a external battery.
XYZ - 84 x 73 x 340mm
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 30% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 40% |
| Additions | Raft : OK / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
How big should the building volume be for this lamp.
can i ask how you got the cable inside the lamp, my tbulb 2 fittings are too big, thank you
I designed a base (with a tiny little drawer!) for this street light: https://www.thingiverse.com/thing:4704109