FAB 365

닫기
Gadgets < EU & US version - Typewriter shape Name card or CF card Holder

EU & US version - Typewriter shape Name card or CF card Holder

Business card or CF card holder
$ 1.49
GOODesign
DESIGNER GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.
 
This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

There are products that are not used often but are absolutely necessary. That is CF card or name card. If you mix it with other small products, it is hard to find it, so it would be nice if you keep it separately.
This CF card holder has added fun to such applications. This product, which takes the form of a toaster, offers a little fun by putting an CF card or name card in place of paper.
However, the sizes of business cards are different in Asia, Europe and the Americas. Therefore, we designed it to match the size of credit cards and business card size in the Europe and Americas.
Depending on the size of the business card, the size of the product has also grown, so we have added more details.

This product does not simply make the SD card product bigger. We have differentiated by adding detail to suit the size.

The product is divided into two pieces, one on the outside and one on the inside, and is assembled after print.
The assembly method is to insert the inner piece by pushing it from the back of the outer piece. It can be a bit tight, so you have to put it in harder.
But after assembly, it is a bit loose. Therefore, the adhesive will stick to the bottom of the outer piece and be fixed in front of it.

The inner part does not require support, but the outer part requires support.

It is also good as an interior accessory by collecting several pieces in various colors.
TOTAL 1 FILES 12.4 MB
Notice!

Feel free to talk about your product. Comments that are irrelevant to the topic may be deleted

    Notice!

    Feel free to talk about your product. Comments that are irrelevant to the topic may be deleted