Multi purpose chest-Dial safeMulti purpose chest for fun
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.
This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
This second safe design uses a new locking structure.
It is a structure that locks by using the dial gear to pull pushing the latch. I designed this structure to be possible with only one printing.
To make it easy to check that it is locked and unlocked, I made a switch that moves according to the rotation of the dial on the front. This is where you can see whether the safe is locked or unlocked.
This is the first product to simultaneously use three different structures at once.
To print this structure, you should not use Brim, nor should you use Support. However, Raft is available.
Support inside the body was made. However, depending on the thickness of the nozzle or the slicing option, this support may not be printed. Please note.
Experience the new world of 3D printing!
infill 10%, Layer thickness 0.1 or 0.2mm, nozzle 0.4mm, No support, No brim, Raft is OK
XYZ - 60 x 64 x 47mm
- [0.1mm] 15h 30m
- [0.2mm] 7h
Feel free to talk about your product. Comments that are irrelevant to the topic may be deleted