FAB 365

닫기
Gadgets < Foldable Robot-L

Foldable Robot-L

4D printing ready product
$ 3.99
AUTOBOTO
DESIGNER AUTOBOTO

It is the tenth series of folding robots to prepare for 4D printing. This robot was inspired by a tin toy.
I refer more to the picture drawn on the toy box rather than the appearance of the tin toy, and I reborn it. A major feature of this folding robot design is the hoses that go back and forth, and the three dial gauges that rotate around the chest.
In the tin toy, the hose which can not be expressed in three dimensions and processed by painting is implemented with unique combination structure. The structure that connects these hoses is also more robust than other folding robots.
Until now, the folding robot's chest dial has been designed so that it can rotate up to two. This time, we designed three of them to rotate together. In order to realize this, I made a lot of test print.

Outline/Perimeter Shells 2~3, infill 10%, Layer thickness 0.1 or 0.2mm, Retraction 6.25mm(for bowden type) or 3.5mm(for direct type), nozzle 0.4mm, No support, No brim, Raft is OK, Recommend filament : PLA
This setting is recommended only and may vary depending on the printer's status.

When expanded, size = X 146mm, Y 127mm, Z 47mm After folding X 70mm, Y 50mm, Z 122mm

RECOMMEND
PRINTER

MATERIAL
COLOR

AVERAGE
TIME

  • [0.2mm] 8h
  • [0.1mm] 19
TOTAL 1 FILES 13.8 MB
Notice!

Feel free to talk about your product. Comments that are irrelevant to the topic may be deleted

    Notice!

    Feel free to talk about your product. Comments that are irrelevant to the topic may be deleted