Store | Gadget

Bitmal-Keeny

$ 2.99

Designer

AUTOBOTO

This character series is a character that represents the personality or state of a person in the form of surface texture / ear / tail / body.
The touch that this character presents helps to stabilize the mind and body. Touching this character with your hands will lower your stress and stabilize your mind. In Asia, this is called shiatsu.

The shape of the surface texture symbolizes the behavior pattern. A uniform surface represents a person with a stable and regular behavior pattern. If the surface is irregular, it represents someone who has a behavior pattern that likes something new.
Ears and tails represent personality. If the tip of the ear and tail is sharp, personality is sensitive and can easily be hurt. On the contrary, if the ears and tails are round, personality is a thing of the past, and forgetting bad memories.

The shape of the body represents activity. If the lower part of the body is narrow and the upper part is wide, it can be said to be an active person who likes exercise. Its body is wide on the bottom and narrow on the top, it expresses a personality that likes activities with little movement such as reading and watching movies.

According to this symbolism, this character represents the following character.

1. Behavioral Patterns - I love changing, new and powerful challenges.
2. Personality - A person who is sensitive and angry but can easily be hurt.
3. Activity - Having moderate activity, it is a good condition to be able to participate in all activities.

Youtube movie - Printing and use

Size = X 68mm, Y 90mm, Z 68mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 3.9 MB
Recommend Print
Material Color
Average Time
[0.1mm] 12h
[0.2mm] 5h
  • is2scooby
    2019-04-24 15:10:49

    Great design! The texture feels fantastic. I am having a bit of trouble getting the plug to screw in, however. Are there any tips or tricks you can share?

    is2scooby
    2019-04-27 02:43:39

    FYI - I just had to take a small file to the plug threads and remove some flash and it screws in great now. It must surely be an issue with my printer and not the file.

    fab365
    2019-04-29 15:05:07

    We are really glad that the problem has been resolved. Our design has done a lot of print testing so that it can work well on any 3D printer if it is a well-managed 3D printer. If you have any questions, please feel free to ask. Thank you.

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !