Store | Gadget

Name card and SD card holder - Apple powerbook

$ 3.49

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

Apple is the company brought a revolution in personal computers. The same is true of notebooks. But at that time, Apple notebooks were too expensive to have. I am also the same. Anyway, the Apple PowerBook has had a lot of impact on other computer companies. I made these monumental products with business cards and SD card holders.

Only one output is required, and it is completed when it is folded in several places. Support is made easy to remove, you do not need to set up support separately.
I made a sliding mechanism to fix the screen to put business cards. Pull this part to fix, you can pin the screen to 45 degrees of business card.
I created a space to insert the SD card into the diskette loading area.
There is no practical function, but I was also expressed that the rotating parts on the back tilt the notebook.

This business card holder can be carried if the screen is folded.
Old Mac-loving 3D printer users enjoy a fun 3D printing life with the nostalgia of classic Macs!

Making Process

In most cases it is okay, but folding this design can break them, so use a hair dryer or heat gun to soften them before folding.
If there is a part where the folding is falling off, you can use adhesive.

When expanded, size = X 205mm, Y 136mm, Z 9mm After folding X 98mm, Y 72mm, Z 23mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 8.4 MB
Recommend Print
Material Color
Average Time
  • wwendorf
    2019-02-27 23:40:50

    I'm unable to print this successfully. The supports weld to the rest of the print. I believe the support is too close to the body of the print. I would rather see one solid piece as a support instead of supports that are drawn to match what a generated support would look like. They are far easier to remove. Can you help me here? I know my printer setup is good because the hinges fold beautifully.

    fab365
    2019-03-01 00:05:19

    Thank you for purchasing our design. We have created a sufficient gap in support where necessary. This has been tested in many printers and filaments. If the support does not fall well, we recommend reducing the amount of filament extrusion. If you use slicing software support, the gaps in the moving part will fill up and you will not be able to move. If you have any problems, please feel free to ask us ~

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !