Store | Gadget

Foldable Car - G

$ 4.79

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

This is the first foldable car design.The former 3D printing modeling of the car requires support, making it difficult to produce neat results. However, the folding design does not require any support, and it is possible to express all parts neatly.

It has redesigned its structure because it is the first car folding method is applied. The basic structure of this is based on the structure of the folding robot-K, and the lower part of the car is designed by applying the sliding method. The selected car is a G-wagen of Benz which is easy to model because there is no curved surface.
This design opens the hood and allows the interior to be seen, and the features inside the engine are described in detail. Spare tires can be folded and unfolded. The wheels are of course rotation. Based on this structure, many cars will be introduced in the future. I hope you have many expectations!

Printing with Prusa i3 mk3
Printing with Ender 3 Pro
Printing with Ultimaker 3
Printing with Prusa i3 mk3 145% scale
Printing with Prusa i3 mk3 80% scale
Print review from aviagorizont
Print review from MAT1UK 3D PRINTING ➪ 12:20~13:40
Print review from Tayfun Kızıltaş
Print review from Make3d.in - 3D Printer in India

When expanded, size = X 158mm, Y 140mm, Z 36mm After folding X 125mm, Y 54mm, Z 53mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings Slic3r
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 15.6 MB
Recommend Print
AD
Material Color
AD
Average Time
[0.2mm] 9~12h
[0.1mm] 15~18h
  • ernesttan1976
    2019-07-03 19:54:14

    I need help here. My model broke at the seams and all the joints are stuck together. Using Cura 0.1 mm 10% infill. Which setting should I tweak to get the joints to move freely?

  • jicd93
    2019-06-26 02:14:42

    Hello friends I have already bought three files from this page! and I have printed them and they have been excellent I have a 3d printer company in chile, and I want to upload the photos of the 3d printed models, what can I do? I obviously mention them in the publication with a link to their page. Greetings.

    fab365
    2019-06-26 13:25:41

    Hi. Thank you for interest in our design. I want to know what purpose you need for our design pictures. When you purchase our design, you have already agreed to the license, which prohibits unauthorized use. But if you want to use photos our 3D printing design, you should put a very large logo on your photo and you should also put a link for that model. Logo is posted here. I hope your business thrives. Thank you~

  • Arch-Graphic
    2019-06-07 17:53:44

    Hi, It need supports., Regards

    fab365
    2019-06-07 18:14:40

    It doesn't need supports at all. Thank you~

  • Robiwan-Kenobi
    2019-04-27 20:43:28

    I just bought the model and tried to print it on my Anicubic i3 mega with Ultrabase print surface. I've never had problems with prints not sticking, but this one failed three times. Dou you have any suggestions? I reduced the print speed at 20mm/s, cleaned the print surface with alcohol and increased the bed temperature. But nothing helped... Using Hair Spray or glue isn't an option, because it would destroy the Ultabase surface. [EDIT] I scaled the model down to 80% do decrease print time.

    fab365
    2019-04-27 21:40:12

    We use Raft when printouts fall out during printing. The bottom part of this design is not visible after folding, so using a Raft is not a big problem for the print. We also use Raft sometimes. Watch this video: https://youtu.be/8RqnxJPqJfo

    Robiwan-Kenobi
    2019-04-28 00:51:05

    Ah, that's an idea - Thank you very much for the quick response! I will try this tomorrow!

  • is2scooby
    2019-04-16 00:37:55

    Another amazing model as always! I'm having a bit of trouble getting the middle of the roof to stick through the whole print. I'm using a raft which normally promotes adhesion but perhaps it could be causing a problem in this case?

    fab365
    2019-04-17 16:33:55

    If you use Raft more widely, you can prevent that part from falling. You can also use Magigoo, Hair gel, hair spray, etc. to prevent printouts from falling. Next time, I hope you succeed in the print. Thank you~

    is2scooby
    2019-04-21 03:11:32

    Thank you! I managed to complete the print by using glue stick + PEI sheet. It came out GREAT! I'm going to purchase your other folding car model now. Thank you for your amazing models and customer service.

    fab365
    2019-04-22 11:48:57

    We are very pleased that you have printed well. It would be better if you could upload your experience with your photos. If you have any further questions, please let me know. Thank you~

  • Deleted

  • Mrcode
    2019-04-06 13:33:40

    is there any suggestion for a good print using cura slicer ?

    fab365
    2019-04-09 15:25:25

    We recommend, Normal Quality(0,1mm), Print speed 40mm/s, travel speed 90mm/s Thanks~

  • Jw
    2019-03-22 10:10:41

    Why I can see the seize of the file, but can't download it?

    fab365
    2019-03-22 16:55:02

    We are sorry for the inconvenience. If you have made a payment, you can download it. If you give us more details or photos, we will find out what the problem is.

  • nedla
    2019-03-16 22:10:45

    think the slicer settings need to be updated,

    mkris
    2019-03-17 04:23:53

    thank you, in that case I have to wait for updates...

    fab365
    2019-03-22 16:57:39

    As soon as possible We will upload slicing settings for Slic3r PE. Thank you.

    fab365
    2019-04-01 00:56:26

    We tested with 0.1mm DETAIL MK3 print setting in Slic3r PE. The result was very good! so you can print with that settings. Thank you~

  • mkris
    2019-03-16 06:50:20

    hi, I would like to print this project very much! but I can not deal with the settings Slic3r PE. I'm sorry but I'm just starting. can someone explain more to me where I can find the individual settings in the program? thank you very much for help

    fab365
    2019-03-22 16:57:57

    As soon as possible We will upload slicing settings for Slic3r PE. Thank you.

    fab365
    2019-04-01 00:56:15

    We tested with 0.1mm DETAIL MK3 print setting in Slic3r PE. The result was very good! so you can print with that settings. Thank you~

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted