Foldable Car - G
$ 4.79
GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
This is the first foldable car design.The former 3D printing modeling of the car requires support, making it difficult to produce neat results. However, the folding design does not require any support, and it is possible to express all parts neatly.
It has redesigned its structure because it is the first car folding method is applied. The basic structure of this is based on the structure of the folding robot-K, and the lower part of the car is designed by applying the sliding method. The selected car is a G-wagen of Benz which is easy to model because there is no curved surface.
This design opens the hood and allows the interior to be seen, and the features inside the engine are described in detail. Spare tires can be folded and unfolded. The wheels are of course rotation. Based on this structure, many cars will be introduced in the future. I hope you have many expectations!
Printing with Prusa i3 mk3 ➪
Printing with Ender 3 Pro ➪
Printing with Ultimaker 3 ➪
Printing with Prusa i3 mk3 145% scale ➪
Printing with Prusa i3 mk3 80% scale ➪
Print review from aviagorizont ➪
Print review from MAT1UK 3D PRINTING ➪ 12:20~13:40
Print review from Tayfun Kızıltaş ➪
Print review from Make3d.in - 3D Printer in India ➪
Print review from CNC programmer ➪
1 : 38 scale
When expanded, size = X 158mm, Y 140mm, Z 36mm After folding X 125mm, Y 54mm, Z 53mm
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 30% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| PRUSA Slicing Settings | Slic3r |
| PRUSA MK3 | Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 40% |
| Additions | Raft : OK / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
Another amazing model as always! I'm having a bit of trouble getting the middle of the roof to stick through the whole print. I'm using a raft which normally promotes adhesion but perhaps it could be causing a problem in this case?
If you use Raft more widely, you can prevent that part from falling. You can also use Magigoo, Hair gel, hair spray, etc. to prevent printouts from falling. Next time, I hope you succeed in the print.
Thank you~
Thank you! I managed to complete the print by using glue stick + PEI sheet. It came out GREAT! I'm going to purchase your other folding car model now. Thank you for your amazing models and customer service.
We are very pleased that you have printed well. It would be better if you could upload your experience with your photos. If you have any further questions, please let me know. Thank you~
Deleted
is there any suggestion for a good print using cura slicer ?
We recommend, Normal Quality(0,1mm), Print speed 40mm/s, travel speed 90mm/s
Thanks~
Why I can see the seize of the file, but can't download it?
We are sorry for the inconvenience. If you have made a payment, you can download it. If you give us more details or photos, we will find out what the problem is.
think the slicer settings need to be updated,
thank you,
in that case I have to wait for updates...
As soon as possible We will upload slicing settings for Slic3r PE. Thank you.
We tested with 0.1mm DETAIL MK3 print setting in Slic3r PE. The result was very good! so you can print with that settings. Thank you~
hi,
I would like to print this project very much! but I can not deal with the settings Slic3r PE.
I'm sorry but I'm just starting. can someone explain more to me where I can find the individual settings in the program?
thank you very much for help
As soon as possible We will upload slicing settings for Slic3r PE. Thank you.
We tested with 0.1mm DETAIL MK3 print setting in Slic3r PE. The result was very good! so you can print with that settings. Thank you~
Very good design thank you for this . Sorry, I am a bit confused about the model. Are the three pictures here of the same version of the model? I have printed one but it looks a bit different to the first picture. Also, I think PETG will be a better fit for this as it has more flex.
Never mind. I found the build video on twitter. I know what is the problem with my print. It is an amazing design by the way. Absolutely love it. Looking forward to more car designs like this in the future.
Thank you. We will try to make more good designs in the future.