Store | Gadget

Foldable Shark

$ 3.99

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

In summer, there is a remembrance of an animal, which is a shark. Sharks are also a subject of horror, but they are also familiar animals for children. So I designed a foldable shark this time.

This foldable shark was the first folding structure applied to fish. I designed a new structure to move the body divided into three. It is designed to move the fins on both sides. The strong jaws and teeth of a shark are the most emphasized part. So I designed the jaw to move.

This folding procedure is as follows:

1. First put the dorsal fin of the shark on one side.
2. Push the tail part and insert it.
3. Then fold the torso and insert it into the rest of the dorsal fin.
4. Finally, if you push the head of the shark and put it, it is finished.

Please refer to the following video for the folding process.

Folding process with Prusa i3 mk3
Folding process with Ender 3 pro
145% scale with Prusa
rainbow silky filament with ender 3 pro
Review from Greg

Stay healthy this summer, and enjoy the fun 3D printing life with fab365 design.

When expanded, size = X 92mm, Y 128mm, Z 71mm After folding X 175mm, Y 80mm, Z 61mm

PRUSA Slicing Settings Simplify 3D
Extruder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interior Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 6.0 MB
Recommend Print
Material Color
Average Time
[0.1mm] Shark : 11h
  • shrockie
    2019-11-01 03:22:27

    The pectoral fins keep breaking off, instead of breaking free, to pivot.. Any suggestions? Is there a way to break them loose another way, that doesn't put as much load on the fin itself?

    fab365
    2019-11-07 15:50:45

    My guess is that the printing of the inner hinge is not very good, so I have difficulty with fin movement, and it seems to break when you give too much force to move it. If you use enough retraction in the slicing options and increase the wall thickness and infill, the fins will be harder and less broken.

  • jenderal
    2019-06-08 15:29:18

    hi, is it possible to print it on small 3d printer? my son like this design, but i only have toybox 3d printer

    fab365
    2019-06-09 17:40:56

    No problem if your 3D printer is in good condition. We also print at 70% size. I'll attach a picture here.

  • Mr-design
    2019-05-12 22:49:09

    Help set up Thanks

    fab365
    2019-05-13 13:51:44

    Hi. It would be nice if you let me know what the problem is with the print first, but I do not have that story, so let me just look at the slicing settings. 0.25mm layer thickness is not very good. We recommend 0.1mm layer thickness. And Bed temp usually uses 60 degrees Celsius. The extrusion width is probably 0.4 mm. If the extrusion width is larger than the nozzle size, the moving parts stick together. I hope this helps.

    Mr-design
    2019-05-15 19:05:52

    Hello dear...thanks for you..

  • Mr-design
    2019-05-12 22:11:08

    Can you guide me?

    fab365
    2019-05-13 13:55:02

    I will help you with your picture with the problems you encounter while printing.

  • Mr-design
    2019-05-12 22:10:19

    My device settings differ from you

  • Mr-design
    2019-05-12 22:07:50

    It is possible to ABS materials?

    fab365
    2019-05-13 13:53:17

    ABS can be used but not recommended due to severe shrinkage. ABS may also export toxic substances during print.

  • tubbers
    2019-04-28 20:18:22

    are there any recommended print settings?

    fab365
    2019-04-29 14:47:56

    We put the slicing settings in the information. We use the same slicing settings for every design. You may also refer to other design slicing settings within FAB365.net. We will add content about Cura and other slicing software later. Thank you~

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !