Quantum Tunnel for Van
FREE
GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
It is a scale model of a Quantum tunnel installed in a van that appears in Ant-Man and Wasp and Avengers: End game. It is installed in the Ford Econoline van and designed to fit into the FAB365 foldable van - FE.
We used three special structures to implement the settings of the movie. First, the depth of the quantum tunnel is expressed by applying the nesting structure. The second is designed to allow the mechanism at the end of the Quantum tunnel device to rotate as the movie sets. Third, we designed a structure that folds and unfolds so that it can be fixed to a van.
To install this Quantum tunnel on a van, open the sliding door on the side of the car and push it into place with your finger tipped down. Then, open the back door and push it up and down to fix it.
With this design, you can enjoy 3D printing in a new way while creating a scene of a movie.
The vans are not included, please click here to download the vans. Download foldable van FE ➪
Please refer to the following video for the folding process.
Folding process with Prusa i3 mk3 ➪
When expanded, size = X 28mm, Y 35mm, Z 32mm After folding X 28mm, Y 33mm, Z 45mm
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 30% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| PRUSA Slicing Settings | Slic3r |
| PRUSA MK3 | Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2~3 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 40% |
| Additions | Raft : OK / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
