Foldable Cabinet for School
$ 1.99
GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
We, suffering tough life- sometimes we miss our childhood when we had many dreams. My desk in my office is no longer my space, and most of the things that are put there are only stressful things. Most of the places you can put these are boring drawers. However, when we went to school, there was my own locker, which was not just a place to put my belongings, but a small space and a universe of mine. I created this design to give us this lost space.
It has a simple folding structure. I used a rotating lock mechanism used in dial boxes, gift boxes and so on. If it does not fit well, slightly cut out the hole. If it is too loose, use adhesive.
Folding process with Prusa i3 mk3 ➪
When expanded, size = X 171mm, Y 181mm, Z 17mm After folding X 45mm, Y 40mm, Z 106mm
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 30% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| PRUSA Slicing Settings | Slic3r |
| PRUSA MK3 | Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 4~4.2mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2~3 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 40% |
| Additions | Raft : OK / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
I printed it twice and tried folding the model it just snaps and doesn't fold. Using PLA. Any way to get the model in individual pieces so I can just glue them together.
Hello
Printed 2 times, brokes on the sides when folding ..
first folding object who broke, an issue plz ? ^^ thanks
I have tried printing this 2 times on MK3 and failed twice. Do you have any suggestions?
Thank you for purchasing our design.
If you send us a photo that failed to print, we will be able to help you.