Store | Gadget
Foldable Car - DMC
$ 4.99

GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
The foldable car series is experimenting with the limitations of the structure that can be realized with foldable car and introduces a new structure every time. This folding car was produced by DeLorean MOTOR COMPANY, but it is a misfortune car, Delorean, which has been discontinued due to a lot of defects and financial failures of the body. Although the car has failed, it is still popular among people, with many appearing in movies and games.
The first thing that I had to worry about when designing this car in a folding way was that of a Gull-wing door. After a long printing experiment, the inside of the door was designed to be printed using the bridge phenomenon. And I made a locking device so that the door can be locked in the open state. This car was particularly popular because it appeared as a time machine in the movie
It is the structure of the wheel which produced the most time. The wheels can rotate sideways while they roll. Engine room with double cover structure is designed to be removable from outside engine room cover so that time machine can be replaced. However, the engine room cover on the inside can be opened and closed without being assembled.
If there are loose parts except moving parts, it is recommended to glue them.
※ This design is not recommended for people with a lot of moving parts and not a lot of 3D printing experience.
※ Print as large as possible to get better results.
Folding process with Prusa i3 mk3 ➪
When expanded, size = X 126mm, Y 120mm, Z 24mm After folding X 53mm, Y 112mm, Z 33mm
PRUSA Slicing Settings | Simplify 3D |
---|---|
Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
First Layer Settings | First Layer Height : 100~150% / First Layer Width : 100% / First Layer Speed : 50% |
Infill | Interlor Fill Percentage : 10% / Outline Overlap : 30% |
Additions | Raft : OK / Brim : NO / Support : NO |
PRUSA Slicing Settings | Slic3r |
PRUSA MK3 | Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO |
Ender Slicing Settings | Simplify 3D |
Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 4~4.2mm |
Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2~3 |
First Layer Settings | First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50% |
Infill | Interlor Fill Percentage : 10% / Outline Overlap : 30~40% |
Additions | Raft : OK / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
What filament did you use for the model in the picture ?