Store | Gadget

ATM money box

$ 1.99

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

We rarely use bank accounts when we need cash and use ATMs. In line with these times, we designed ATM banks.

The form is divided into two parts, the outside and the inside, and the inside is folded first, and then the outside is folded and wrapped.

How to use is as follows.
1. Collect coins by putting coins into the hole on the top.
2. When you take out the coin, push the SD card or a small thin object of similar size to the hole with the triangle on the front and the coin will be poured out.

※ If you print this design large, the coin may come out, so please print at this size.

You rarely use cash these days, but if you save a little, it can be very useful when you need it very often.

Size, when all parts are fitted X 52mm, Y 54mm, Z 92mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 100~150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings Slic3r
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4~4.2mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2~3
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30~40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 3.3 MB
Recommend Print
Material Color
Average Time
  • rmooreh
    2019-08-14 00:29:16

    You need to fix this model, the slider to hold the coins in does not close all the way so the coins just drop back out and soon as you put them in.

    fab365
    2019-08-16 12:19:52

    Hi, We tested many many times for that. In conclusion it is the best. So if you don't print big or put too small coins, you won't have a problem. The gap is so small that it doesn't really come out. You don't have to worry. Thank you~

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !