Foldable jack O lantern - Trans face V 1.1
$ 3.99
GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
Version 1.1 fixes
The following modifications have been made to meet customer requirements.
1. We designed the logo to be 70% smaller and lowered the position to make it less visible than before.
2. Changed the structure of the stem so that the small round protrusions are not easily broken.
If you have purchased previously, you can download it again. Thank you~
I designed it for the coming Halloween day. This jack o lantern is very simple, consisting of two parts: the body and the stem. This design is made with thin shapes of eyes, nose and mouth for stable printing and soft lighting effect.
※ There is logo on the side ※
※ The stalk of the transparent face and the cut off face are different. Only one stalk is included. Be sure to check. ※
The assembly method is very simple, just insert the ends of the body pieces one by one on the stem.
One thing to note when printing is that there is a risk that the outer parts will fall off during printing. Therefore, pay attention to bed / plate adhesion. If your bed / plate adhesion is not good, I recommend using Raft.
To insert the LED tea candle inside, pull out three strands of the body, insert the LED tea candle, and insert the remaining body pieces.
Printing and Folding process with ender 3 pro ➪
Printing and Folding process with Prusa i3 mk3 ➪
Printing and Folding process with Tevo tarantula pro ➪
Review from René Gorsinsky ➪
Review from Maker Melissa's Lab ➪
LED tea candles are sold in Ikea as GODAFTON, MOGNAD, STOPEN. The size of the LED tea candle is about 40 mm in diameter. Even if it is not a product of IKEA, you can put it inside if it is an LED tea candle. Have a great Halloween day.
When expanded, size = X 137mm, Y 184mm, Z 53mm After folding X 89mm, Y 87mm, Z 87mm
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80% |
| Infill | Interlor Fill Percentage : 15% / Outline Overlap : 30~40% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| PRUSA Slicing Settings | Slic3r |
| PRUSA MK3 | Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 4.2mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 15% / Outline Overlap : 30~40% |
| Additions | Raft : OK / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
I really wish there was only one Fab365 logo and it was either on the inside or the bottom. I'm a loyal customer, will be happy to tell people where I bought the design, and won't share it with anyone. The other Fab products have better logo placements. My wife immediately reacted to the logos and did not like them, especially as this is a toy for my children.
Why no brim? what happens if you try and print with a brim?
Brim fills the gaps in each part so that even after printing is complete, each part will not move. Raft is created under each part, and later removed all at once, so it does not fill the gaps of each part.
Is a version available without the logo on it?
Many people have given us their opinions about the logo, so from now on we will be more cautious about position and size.
Thank you!
i was just about to buy them all until i seen the logo on them pretty ridiculous you spoil the prints ill look on trader instead