I added Santa Claus as a movable gingerbread series. This time it changed from the previous movable gingerbread(gingerbread man and girl).
1. Many modifications were necessary to express Santa's fat body.
2. It was very difficult to adjust the angle so that the beard did not touch the body.
3. Changed the direction of rotation of the arms to allow a more natural pose.
4. The detachable hat is designed to fit into other movable gingerbread.
Santa hats must be glued to prevent them from falling out.
print with Prusa ➪
We wish you a Merry Christmas with this gingerbread Santa Claus.
Merry Christmas ~
size = X 69mm, Y97mm, Z 24mm
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 30~40% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| PRUSA Slicing Settings | Slic3r |
| PRUSA MK3 | Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 4.2mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 15% / Outline Overlap : 30~40% |
| Additions | Raft : OK / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
