This is the first job commissioned by the company to FAB365.
The client is
In the meantime, there have been a lot of requests, but the requests could not be made because the costs did not match. However, this time the cost and conditions matched well, and we were able to produce good results.
FAB365's designs can be purchased at very low prices, but the prices do not imply production costs. A lot of people buy these designs and fill the production cost. If you would like us to request commissioned production, please understand this.
It adopts a structure to print and connect the head separately to the client's requirement that the ear should be movable. In addition, this rabbit character can rotate his head and move his arms freely.
※ important ※
※ The arm may fall out after printing is complete. In this case, increase extrusion multiply. ※
Print and how to use with Prusa i3 mk3 ➪
Print and how to use with Ender 3 pro ➪
The background story setting and description for this character are as follows:
"SUNGLASBANNY are living in a country of snow. Use the super powers can move through time and space.
Barney put someone brings a wish from the bottom of my heart. Meet the world’s many friends worried and
warm wishes rabbit chest that addresses the issue. Tell a friend Wish~"
When expanded, Head size = X 46mm, Y 94mm, Z 48mm / Body size = X 103mm, Y 35mm, Z 28mm After folding X 52mm, Y 44mm, Z 118mm
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4~2.6mm or Retraction Distance : 0.8mm, Retraction Vertical Lift : 0.6mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2~3 |
| First Layer Settings | First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 15% / Outline Overlap : 35% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| PRUSA Slicing Settings | Slic3r |
| PRUSA MK3 | Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 5mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2~3 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 45% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| CR-10S Pro Slicing Settings | Cura |
| Quality | Layer Height : 0.1mm, 0.2mm / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Patten : Grid |
| Material | Flow : 100% / Retraction Distance : 5.2mm |
| Build Plate Adhesion | Raft / Raft Extra Margin : 3mm / Raft Air Gap : 0.3~0.32mm |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
I am having an issue with the head. In prusa slicer 2.3.0 there are multiple places where the ear and head are connected. This locks the ears in.
I did try it in cura and it sliced fine. I went back to prusa slicer and tried a bunch of different settings but for some reason it is seeing the ears connected.
Either way it looks like a smidge more clearance in the model might fix it. There is no reason for the ears to be this close to the head, lower down is where the joint is created.
Thanks!
We checked Cura, Simplify 3D, Prusa slicer. However, only the Prusa slicer generates the trajectory of the nozzle of that part as such. There is no problem with STL files. I think it will get better when the Prusa slicer is upgraded.
Thank you for good information.