Foldable Porsche 911

$ 4.99



GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

In response to requests and high votes from's request page, this time I made the foldable Porsche 911 1990.
Porsche 911 request
The Porsche 911 is a sports car, but it's not that big nonetheless. Therefore, there was very little space to create a folding and fitting structure, which required a lot of effort.

There are some things to be careful for when printing and folding this design.
1. It is recommended that the hood and engine cover be moved several times before folding to ensure smooth movement before folding. If you try to move it forcibly, it may break.
2. When closing the hood and engine cover, push it in to close it and close it well.
3. If you feel loose after folding this car, please use adhesive to stick it tightly.

Please refer to the following video for the folding process.

Printing on Twotrees Bluer and folding process
Printing on CR10s pro and folding process

Soon, we will be making a turbo version, so please look forward to it~

If you have a design you want to create, you can post it on the request and vote a lot.
Design request
We look forward to your participation.

1 : 38 scale
When expanded, size = X 116mm, Y 115mm, Z 51mm After folding X 48mm, Y 113mm, Z 34mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4~2.6mm or Retraction Distance : 1mm, Retraction Vertical Lift : 0.6mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 100% / First Layer Width : 95% / First Layer Speed : 80%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 35%
Additions Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings PrusaSlicer
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 5.2mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 100% / First Layer Width : 95% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 50%
Additions Raft : OK / Brim : NO / Support : NO
CR-10S Pro Slicing Settings Cura
Quality Layer Height : 0.1mm, 0.2mm / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Patten : Grid
Material Flow : 100% / Retraction Distance : 5.2mm
Build Plate Adhesion Raft / Raft Extra Margin : 3mm / Raft Air Gap : 0.3~0.32mm
File 16.5 MB
Average Time
[0.1mm] Porsche 911 : 14h
  • bach37strad8296 Creality Ender-3 ProCura
    2021-01-24 19:08:07

    Does this have to be printed at 100% scale? I tried 50% at your suggested Cura settings and all the sliding/connecting bits fused to the print.

    fab365 Administrator
    2021-01-25 09:19:55

    Due to the folding structure, the difficulty of printing becomes difficult as the size is reduced.
    Although it depends on the condition of the printer, we cannot guarantee the print quality when reducing the size.

    bach37strad8296 Creality Ender-3 ProCura
    2021-01-29 07:54:28

    I tried again at 100% with your settings and my own, and the connecting bits are still fusing to the prints. They crack when trying to free them. Any suggestions?

    fab365 Administrator
    2021-01-29 13:38:57

    It is recommended to refer to the print tips of fab365.

    If you upload a picture, we can suggest a more accurate solution.

  • 3djoe
    2020-09-14 07:47:38

    How large can this be scaled for printing? Would like to fill a 40 by 40 cm build plate.

    fab365 Administrator
    2021-01-25 09:18:12

    Scale up is freely possible as long as the printer supports it.

  • Skaryd Prusa i3 Mk3/Mk3sPrusaSlicer
    2020-09-09 02:53:25

    I have some issues with this model, where the bottom of the parts where the part wides tend to curl up at the edges and pointy edges. It affects then the geometry of the model slightly. I tried PETG, .. the result is .. mediocre. Now i am printing in PLA prusament, similar issue, but smaller. Will know in 14 hours the result :)

    fab365 Administrator
    2020-09-09 12:58:26

    You may need to apply something to increase adhesion to the plate/bed. We use a smooth bed and mainly apply hair gel.
    Or, Raft is very good for that case.
    I hope you succeed!!!
    Thank you~

  • steve white
    2020-07-03 00:51:23

    anyway of removing the ringing on the sides and roof ? it has a kind of wood type grain / ringing on the sides and roof? rings ruin the model unfortunately

    fab365 Administrator
    2020-07-13 13:15:37

    If I make a car in a foldable design way, this design does not require support, and I get the pleasure of a new way to create it in 3D printing. On the other hand, the lamination traces, such as the contour lines seen due to the gentle angles of the sides of the car, are inevitable.

  • Yuval Creality Ender-3Cura
    2020-06-18 17:37:21

    Beautiful! Turbo version mentioned in the request will be a separate one?

    fab365 Administrator
    2020-06-18 22:20:57

    Turbo version will be a separate.
    Please look forward to it~

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted