Space X Falcon 9 Rocket

$ 5.49

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

The dragon capsule and trunk of the Space X project were loved by many 3D printer users.
Download Crew Dragon Capsule and Trunk STL- https://fab365.net/items/197
Download Dragon capsule and trunk

Along with this, many 3D printer users have requested to make a Falcon 9 rocket with a dragon capsule up to the orbit. So I made the Falcon 9 rocket at the request of my clients.
This Falcon 9 rocket was intended to be able to connect to the previously created dragon capsule and trunk. So, it is the largest I have ever designed. So, I designed it to be printed in many parts.
In this design project, the landing leg was the biggest problem to be solved, but the piston structure was changed to a folding method because it was impossible to print in a slim shape in desktop 3D printing.
But with these changes
1. This Falcon 9 rocket can fold and unfold its landing legs and stand safely.
2. The wings can also be spread and folded.

The assembly process of this Falcon 9 rocket is as follows.
1. Fold the 4 landing legs first.
2. Connect the pipe (folding structure) that connects the landing legs and the body.
3. Glue the landing legs.
4. Attach the landing leg to the body and connect the folding pipe. When connecting pipes, connect them by pushing them at an angle perpendicular to the body.
5. Connect the landing legs to the body and fold them into the body.
6. Glue the nozzle to the bottom.
7. Attach the bodies in order. It is recommended to use adhesive.
8. Attach the cables to the body in order. We recommend using glue.
9. Put the dragon capsule and the trunk on the top to finish.

See the video for the above process.

※ Dragon capsule and trunk are not included.

Congratulations on the success of Space X, and hope that the era of the commercial space industry opens as soon as possible.

Size, when all parts are fitted X 232mm, Y 232mm, Z 897mm

Additions Raft : OK / Brim : NO / Support : NO
Infill Interlor Fill Percentage : 15% / Outline Overlap : 30~40%
First Layer Settings First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50%
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4.2mm
Ender Slicing Settings Simplify 3D
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings Slic3r
Additions Raft : OK / Brim : NO / Support : NO
Infill Interlor Fill Percentage : 15% / Outline Overlap : 30%
First Layer Settings First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80%
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
PRUSA Slicing Settings Simplify 3D
File
File 31.1 MB
Recommend Print
Material Color
Average Time
[0.1mm] Landing Leg : 4h
[0.1mm] Landing Leg Bar : 1h 30m
[0.1mm] Merlin Engines : 4h 10m
[0.1mm] P1 : 15h 30m
[0.1mm] P2 : 14h 40m
[0.1mm] P3 : 18h 20m
[0.1mm] P4 : 18h 30m
[0.1mm] P5 : 14h 30m
[0.1mm] P6 : 17h
[0.1mm] Side Cable : 4h
  • Deleted

  • Deleted

  • dspector32 Anycubic 4MaxCura
    2020-12-04 08:17:26

    Great model but I will need to reprint a couple of parts. Any suggestions on what I am doing wrong. The landing leg bars only fold on one half and the other is fused together. Also the side pieces are not fitting into the slot.

    Thanks

    schuricg Creality CR-10SSimplify3D
    2020-12-31 09:17:49

    i Had the same problem.

    To get the landing arms to work I had to print them using a raft and .1 layer height. Printing on the bed the first layers ran together due to the tight tolerance and squeeze of the first layers.

  • bronco7794 Monoprice UltimateSimplify3D
    2020-11-24 04:37:13

    is there any way you could make P4 into two pieces.. I'm printing on a Prusa mini and its just about 4mm outside my hight range fo 180mm I already printed the crew module so I'd rather not scale it and have to reprint.

    fab365 Administrator
    2020-12-02 09:41:16

    Hi bronco7794.
    How about dividing p4 in a slicer program and attaching it with glue after printing it?

  • zimmy1958 Prusa i3 Mk3/Mk3sPrusaSlicer
    2020-11-23 12:00:29

    You need to make the bottom skirt around the engines. Love the model I have printed it and it is very good. And also a faring for the top to. THANKS for great work I have several of your models all great.

    fab365 Administrator
    2020-11-24 11:26:34

    Thank you very much!
    We are happy that you love our model.
    PS: Is that skirt referring to a skirt that is one of the slicer's options?

  • mikecoscia
    2020-11-22 00:14:08

    Any chance we can get the nose cone added? I purchased the crew dragon as well, but the nose cone would be a great addition!

    fab365 Administrator
    2020-11-22 09:55:47

    Hi mikecoscia. This item is being voted on in the request below.
    https://fab365.net/requests/3518607678/Falcon_9_Payload_Fairing_Plan
    If the request gets a lot of votes, It is more likely to be produced by fab365.

    trall Prusa i3 Mk3/Mk3sPrusaSlicer
    2020-11-24 08:51:25

    Do I have to wait for the fairing to pick up votes? Is it really so difficult to do, especially when there are people who want to buy it.

    fab365 Administrator
    2020-11-24 11:29:08

    We have a lot of production requests, so voting is a very important factor in setting the order of production. But this is a simple form, so I'll try to build it as soon as possible.
    Thank you~

    mikecoscia
    2020-11-27 22:39:29

    Thank you, just voted! How long is the voting process? Hope we get enough supporters to have it built!!

    EverGrumpy Prusa i3 Mk3/Mk3sPrusaSlicer
    2020-11-30 23:08:16

    Haha, know this feeling.
    Personally I'm waiting for the second stage engine to get added. :p

  • happyman.reiter@gmail.com Creality Ender-3Cura
    2020-11-17 10:31:19

    Hello - I am extremely excited to print this. Are there Cura recommended settings for this print?

    fab365 Administrator
    2020-11-17 13:17:50

    Hi happyman.
    You can see how to download the cura setting file on the page below.
    https://fab365.net/help/29/how-to-import-fab365-cura-profile

    In anticipation of great output, it is recommended to share the printed rocket with other users in the review.
    https://fab365.net/items/203#review

    If you have any other problem, please let us know.
    help@fab365.net

    happyman.reiter@gmail.com Creality Ender-3Cura
    2020-11-18 08:06:15

    Thanks, I will try this. Does this profile apply to all of your products?

    fab365 Administrator
    2020-11-18 13:18:10

    Yes. Can be used to print all models.

  • EverGrumpy Prusa i3 Mk3/Mk3sPrusaSlicer
    2020-10-07 23:49:24

    Love the model, but would be cool if the entire mission could be reenacted with it.
    This would make it a great model to use in science classes. :)

    (Right now, the second stage doesn't have an engine ^^ )

    fab365 Administrator
    2020-10-09 21:48:59

    Thank you very much!
    But what means entire mission?

    EverGrumpy Prusa i3 Mk3/Mk3sPrusaSlicer
    2020-10-09 23:09:19

    Well, this rocket has 2 stages and the model only has 1 stage.


    In this video around 1:10 you can see the second stage kick in.
    https://www.youtube.com/watch?v=sZlzYzyREAI

    Would be cool if the model also had this second stage so it's true to the real rocket. ^^

  • 1111 Anet A6Cura
    2020-09-27 19:07:27

    I love it but i thing its too expensive so i did not use the crew dragon but i make my own cone for it

  • ahargett0 Prusa i3 Mk3/Mk3sPrusaSlicer
    2020-09-22 03:16:20

    Noticed some others had issues with the folding landing gear hinges. I had some issues as well and found adding a brim just 2-3mm wide helped greatly. there are thin features on the hinges that adhere to the build surface with just two widths of layers, these tend to want to curl back up away from the bed if the print settings are not perfect. Hope this helps others. Awesome model and design work!

    fab365 Administrator
    2020-09-28 20:13:58

    Thank you very much for sharing your printing experiences.
    Your experiences will help others!
    Thank you so much again.

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted