Space X Falcon 9 Rocket

$ 5.49



GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

The dragon capsule and trunk of the Space X project were loved by many 3D printer users.
Download Crew Dragon Capsule and Trunk STL-
Download Dragon capsule and trunk

Along with this, many 3D printer users have requested to make a Falcon 9 rocket with a dragon capsule up to the orbit. So I made the Falcon 9 rocket at the request of my clients.
This Falcon 9 rocket was intended to be able to connect to the previously created dragon capsule and trunk. So, it is the largest I have ever designed. So, I designed it to be printed in many parts.
In this design project, the landing leg was the biggest problem to be solved, but the piston structure was changed to a folding method because it was impossible to print in a slim shape in desktop 3D printing.
But with these changes
1. This Falcon 9 rocket can fold and unfold its landing legs and stand safely.
2. The wings can also be spread and folded.

The assembly process of this Falcon 9 rocket is as follows.
1. Fold the 4 landing legs first.
2. Connect the pipe (folding structure) that connects the landing legs and the body.
3. Glue the landing legs.
4. Attach the landing leg to the body and connect the folding pipe. When connecting pipes, connect them by pushing them at an angle perpendicular to the body.
5. Connect the landing legs to the body and fold them into the body.
6. Glue the nozzle to the bottom.
7. Attach the bodies in order. It is recommended to use adhesive.
8. Attach the cables to the body in order. We recommend using glue.
9. Put the dragon capsule and the trunk on the top to finish.

See the video for the above process.

※ Dragon capsule and trunk are not included.

Congratulations on the success of Space X, and hope that the era of the commercial space industry opens as soon as possible.

Size, when all parts are fitted X 232mm, Y 232mm, Z 897mm

Additions Raft : OK / Brim : NO / Support : NO
Infill Interlor Fill Percentage : 15% / Outline Overlap : 30~40%
First Layer Settings First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50%
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4.2mm
Ender Slicing Settings Simplify 3D
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings Slic3r
Additions Raft : OK / Brim : NO / Support : NO
Infill Interlor Fill Percentage : 15% / Outline Overlap : 30%
First Layer Settings First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80%
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
PRUSA Slicing Settings Simplify 3D
File 31.1 MB
Recommend Print
Material Color
Average Time
[0.1mm] Landing Leg : 4h
[0.1mm] Landing Leg Bar : 1h 30m
[0.1mm] Merlin Engines : 4h 10m
[0.1mm] P1 : 15h 30m
[0.1mm] P2 : 14h 40m
[0.1mm] P3 : 18h 20m
[0.1mm] P4 : 18h 30m
[0.1mm] P5 : 14h 30m
[0.1mm] P6 : 17h
[0.1mm] Side Cable : 4h
  • clue3030 Creality CR-10SSimplify3D
    2020-09-18 21:14:07

    I bought this and the only part that doesn’t print correctly is the hinges for the fold out landing pads. It doesnt slide right. Needs to be made with more material to hold together better.

    1111 Anet A6Cura
    2020-09-27 19:09:48

    i had the same problem
    i solve it by making it 50% speed and 100% infil
    still not super smooth and durable but its better than nothing

    fab365 Administrator
    2020-09-28 20:32:58

    I think it is because the surface of the slide part is not smooth. Increasing the Retraction helps to smooth the surface of the print.
    If you upload a picture, I can help you more accurately.
    Thank you.

  • NSheriff Creality Ender-3Cura
    2020-09-17 00:22:36

    Are you going to make a fairing for this or just the dragon?

    1111 Anet A6Cura
    2020-09-27 19:10:43

    i am working on the cone for the top i will send it to you if you want to

    fab365 Administrator
    2020-09-28 20:30:12

    We have plans for fairing. Please look forward to it.

  • danghali Creality Ender-5 PlusCura
    2020-09-10 08:20:06

    hi, what are the specific print settings for the legs and the leg bars? i tried printing them in a couple different methods but they dont snap in half cleanly like you do in the video. thanks

    fab365 Administrator
    2020-09-28 20:29:27

    The upper body must be joined in order for the legs to snap to the body.

  • Tallen8 Creality Ender-3Cura
    2020-09-04 08:26:58

    Hi, what % infill do I use?

    fab365 Administrator
    2020-09-04 11:59:34

    My infill setting is 15%
    I will add settings informations.

    1111 Anet A6Cura
    2020-09-27 19:12:26

    i used 100% for the bars 20% for the legs and 5% for everything else

    fab365 Administrator
    2020-09-28 20:34:37

    Thanks user 1111 for sharing your printer settings.

  • TeaBetOrbiter Prusa i3 Mk3/Mk3sPrusaSlicer
    2020-09-02 00:49:34

    Two questions:

    1) How well does this model scale? 1m tall is quite large. Will the folding mechanisms on the legs etc still work at 50%?

    2) How heavy is the final print that you show in the photos? It looks like it uses a significant amount of filament.

    fab365 Administrator
    2020-09-02 12:30:50

    1) If your 3D printer is in good condition, even if you print it at 50% size, the landing leg will work.
    2) The total weight is 590 grams for 100% scale

  • EirikurSnjolfs Creality Ender-3Cura
    2020-09-01 01:04:56

    How tall is a fully printed one (including the capsule and trunk)?

    fab365 Administrator
    2020-09-01 11:28:10

    About 1 m.
    Exactly, 103 cm.
    Thank you, Please enjoy~

  • daviq Prusa i3 Mk3/Mk3sPrusaSlicer
    2020-08-30 22:41:17

    i love the design.
    Could you please informed us about what PLA you printed it with?
    I`m referings to Brand and color-name
    I really like the color you used and want to make sure i have the same color available when i have time to buy and print this beauty.


    fab365 Administrator
    2020-08-31 02:38:17

    I used korean brand PLA.
    So I guess similar color for dark parts is Esun grey, or fiberlogy graphite.
    The bright will be good for Fiberlogy grey, or Paramount prototype grey.
    Simply said, Light grey/white and Dark grey/silver PLA is good.
    Please enjoy~

  • sento_elu Anycubic ChironPrusaSlicer
    2020-08-28 17:54:09

    hi, whats the recommended setting to print on prusa mk3s and does it need any support?

    fab365 Administrator
    2020-08-29 13:48:47

    No supports needed.
    There is no special settings for this design.
    High quality setting is good.
    Please enjoy~

  • Landocommando0322 Creality Ender-5Cura
    2020-08-28 15:07:06

    Is this model the same scale as your Crew capsule?

    fab365 Administrator
    2020-08-28 15:23:14

    Yes, it is!!!
    Same scale!
    Please enjoy~


Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted