Foldable Tank T-34-76
$ 5.49
GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
The foldable tank T-34-85 was quite popular. This time I learned that there are many fans of the T-34 tank in the world. There are several variations of the T-34 tank, and there was a request to build them.
So this time I made the T-34-76 a foldable tank.
The T-34-76 was built before the T-34-85 during World War II. And there is a slight difference between what was produced in 1942 and what was produced in 1943, this time with a version produced in 1942.
The big difference between the T-34-76 and the T-34-85 is the shape of the turret. The turret is very small and has a sleek shape. And the size of the barrel is smaller than the T34-85 equipped with a 76mm cannon and an 85mm cannon.
The shape of the wheel is also a little simpler. And there is no auxiliary fuel tank. Instead, it comes equipped with a spare tracks.
The overall design of the T34-76 is low and speedy. Complete the WWII Soviet tank collection with the T34-85~
Many 3D printer users are requesting that various tanks be designed in a foldable form. FAB365 will continuously manufacture military products according to the requests of 3D printer users. Please request a lot.
1 : 48 scale
When expanded, size = X 110mm, Y 139mm, Z 89mm After folding X 69mm, Y 138mm, Z 52mm
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extruder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
| Layer Settings | Layer Height : 0.1mm or 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80% |
| Infill | Interior Fill Percentage : 15% / Outline Overlap : 30% |
| Additions | Raft : NO / Brim : NO / Support : NO |
| PRUSA Slicing Settings | Prusa Slicer |
| PRUSA MK3 | Layer Height : 0.1mm or 0.2mm / Raft : NO / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extruder | Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm |
| Layer Settings | Layer Height : 0.1mm or 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50% |
| Infill | Interior Fill Percentage : 15% / Outline Overlap : 30~40% |
| Additions | Raft : NO / Brim : NO / Support : NO |
| Ender Slicing Settings | Cura |
| Quality | Layer Height : 0.1mm or 0.2mm / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Pattern : Grid |
| Material | Flow : 100% / Retraction Distance : 5.4mm |
| Additions | Raft : NO / Brim : NO / Support : NO |
| CR-10S Pro Slicing Settings | Cura |
| Quality | Layer Height : 0.1mm or 0.2mm / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Pattern : Grid |
| Material | Flow : 100% / Retraction Distance : 5.4mm |
| Additions | Raft : NO / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
Wow! This is my favorite tank ever. Hope to print soon.
Thank you! We hope you enjoy well.
Most default extrusion width is 0.45mm in Prusa slicer.
If your nozzle diameter is 0.4mm, this setting is not good.
So you have to change extrusion width to 0.4mm
If changing the settings like this does not solve the problem, try increasing the Extrusion multiplier.