Store | Gadget

paper cup holder with handle - tall size

$ 2.99

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

The previously designed handle type paper cup holder was designed to match the paper cups used in Korea, so it was impossible to use it because it did not match the size of paper cups in other countries. So, there were many requests to design it according to the size of the Starbucks cup. So, finally, this time, I redesigned it according to the size of the Starbucks tall size.

When I redesigned it for Starbucks' tall sized paper cups, this paper cup holder looked too big, so there was a slight design change in the shape of the handle and lid.

This product is designed so that it can be used with the sleeve and lid in place, ie, as soon as you receive your coffee.

PLA starts to melt at a minimum of 180 degrees Celsius, so it will not deform even if a paper cup filled with boiling water is inserted. If you're concerned about that, you don't need to worry about temperature during use if you print using PET-G.

PS: The pine green color of the esun filament is very similar to the color of the Starbucks logo.

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80%
Infill Interlor Fill Percentage : 15% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings Slic3r
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4.2mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 15% / Outline Overlap : 30~40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 4.5 MB
Recommend Print
Material Color
Average Time
[0.1mm] Body : 21h

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !