Foldable Iron maiden

$ 4.49

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

The Iron Maiden came to mind while trying to make something with a eerie atmosphere for the upcoming Halloween Day. So I made this Iron Maiden in a foldable structure. Iron Maidens have different shapes, so I designed my own Iron Maiden by referring to them. To this end, a part was printed separately and designed by attaching or inserting with adhesive.

This design can be used as lighting to create a spooky atmosphere by putting an LED candle light inside.
And you can put a lot of small things inside.

The process of making this folding iron maiden is as follows:

1. Glue the middle awl to the inside center.
2. Glue small awls to the grooves of both doors.
3. Put its head on the body.
4. Hold the door hinge and rotate it inward to insert it. All four hinges are the same.
5. Put the body on the base.
6. Fit the door handle.

Have a spooky Halloween with this foldable iron maiden~
Happy Halloween~

When expanded, size = X 145mm, Y 166mm, Z 59mm After folding X 86mm, Y 80mm, Z 184mm

Additions Raft : OK / Brim : NO / Support : NO
Infill Interlor Fill Percentage : 15% / Outline Overlap : 30~40%
First Layer Settings First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50%
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4.2mm
Ender Slicing Settings Simplify 3D
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings Slic3r
Additions Raft : OK / Brim : NO / Support : NO
Infill Interlor Fill Percentage : 15% / Outline Overlap : 30%
First Layer Settings First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80%
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
PRUSA Slicing Settings Simplify 3D
File
File 24.0 MB
Release Date
2020-10-08
Average Time
[0.1mm] Body : 17h 30m
[0.1mm] Handle : 5m
[0.1mm] Awl_Back : 1h 10m
[0.1mm] Awl_Side : 40m
[0.1mm] Pedestal : 5h 40m

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !