Foldable Humvee/Hummer

$ 5.69

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

At the request of many customers, I designed a foldable humvee. The military humvee is very large, almost the size of a small tank. So, I put a lot of effort into making the unfolded size smaller so that it can be printed on ordinary 3D printers.
Many customers requested that the tires be printed separately and designed to fit, but this time we applied that request.

The process of folding and assembling this foldable military humvee is as follows.

1. Fold the engine and windshield slightly to fit.
2. Insert both side parts into the roof parts of the humvee.
3. Align the front and rear parts with the side parts in a good fit.
4. Press the lower part of this car into the front part and the rear part.
5. Fit each of the 4 tires.
6. Glue the front and rear bumpers.
7. It is complete by inserting the roof parts.

Please watch the video for more details.

1 : 35 scale

When expanded, size = X 173mm, Y 183mm, Z 45mm After folding X 64mm, Y 140mm, Z 56mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4~2.6mm or Retraction Distance : 1mm, Retraction Vertical Lift : 0.6mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 100% / First Layer Width : 98% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 35%
Additions Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings PrusaSlicer
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 95% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 55%
Additions Raft : OK / Brim : NO / Support : NO
CR-10S Pro Slicing Settings Cura
Quality Layer Height : 0.1mm, 0.2mm / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Patten : Grid
Material Flow : 100% / Retraction Distance : 5.4mm
Build Plate Adhesion Raft / Raft Extra Margin : 3mm / Raft Air Gap : 0.3~0.32mm
File
File 25.9 MB
Recommend Print
Material Color
Average Time
[0.1mm] Humvee : 24h
[0.1mm] Humvee Roof : 2h 30m
[0.1mm] Humvee Bumper : 30m
[0.1mm] Humvee Tire : 4h

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted