Foldable AEC-Regent 3 Red bus Double decker -1937

$ 5.49

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

There are quite a few car enthusiasts who like trucks and buses, not cars. So this time I designed a foldable British double-decker bus. Among them, I chose the well-known AEC-Regent 3 Red Double decker bus.

FAB365's foldable cars have been designed in a scale of 1:48, as they scaled to print on the most popular 235mm x 235mm build bed 3D printer. However, these large cars, such as double-decker buses, could not be printed on a 235mm X 235mm build bed at once, so the parts were further divided.

I made a support that is easy to remove in some parts to express through the windows. Since the support is included in the model data, please turn off the support option in the slicing software.

The headlamps and radiator grille look better if you use materials that have a metallic feel.

If there are any loose parts, it is recommended to attach them with adhesive.

One thing to keep in mind during the folding process is to insert the front and sides of the bus and then pull it out to fix it. Please refer to the video for this part.

Please enjoy~

Size, when all parts are fitted X 52mm, Y 167mm, Z 93mm

Additions Raft : OK / Brim : NO / Support : NO
Infill Interlor Fill Percentage : 15% / Outline Overlap : 30~40%
First Layer Settings First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50%
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4.2mm
Ender Slicing Settings Simplify 3D
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings Slic3r
Additions Raft : OK / Brim : NO / Support : NO
Infill Interlor Fill Percentage : 15% / Outline Overlap : 30%
First Layer Settings First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80%
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
PRUSA Slicing Settings Simplify 3D
File
File 93.5 MB

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted