Foldable Knight Bus Option Parts

FREE

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

After designing a foldable British double-decker bus, there were a lot of requests from many people to make it possible to replace the three-decker bus(Knight bus) from Harry Potter with additional parts.
When I tried to make the three-decker bus (Knight bus), I realized that it was a form that had to be replaced from the second floor, leaving only the first floor. So there was a lot of work. However, I thought it was worth doing and I proceeded.
So, in order to use this optional part to make the Knight bus featured in Harry Potter, the upper floor of the folding double-decker bus must be removed and the second and third floors of this optional part must be connected.

The color of the three-decker bus in Harry Potter is purple. So it would be nice to print the first floor of the foldable double-decker bus in purple first and then print this extra part up and up.

To thank our customers for your support, this optional part is FREE. With this part, you can immerse yourself in the magical world of Harry Potter again.

Please enjoy~

Size, when all parts are fitted X 52mm, Y 167mm, Z 124mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4~2.6mm or Retraction Distance : 1.2mm, Retraction Vertical Lift : 0.6mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 100% / First Layer Width : 98% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 35%
Additions Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings PrusaSlicer
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 95% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 55%
Additions Raft : OK / Brim : NO / Support : NO
CR-10S Pro Slicing Settings Cura
Quality Layer Height : 0.1mm, 0.2mm / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Patten : Grid
Material Flow : 100% / Retraction Distance : 5.4mm
Build Plate Adhesion Raft / Raft Extra Margin : 3mm / Raft Air Gap : 0.3~0.32mm
File
File 35.7 MB
  • RGmoto
    2021-01-01 01:01:26

    Please add your wonderful supports to the rear windows of the 2nd floor, and both ends of the 3rd floor. They worked awesome at the front of the 2nd floor and the first floor of the base Bus model, so it's a shame that they're missing in the rest. :)

    I'm doing these parts on my Prusa Mini and I'm delighted that they all fit within the 180mm print area. I'm extremely impressed with how the model looks at 0.10mm layer height and my 0.25mm nozzle.

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted