Foldable 3 Stacked Snowman

$ 3.99



GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

There are two main types of snowmen, one made of two snowballs, and the other one made of three snowballs.
A snowman made of two snowballs that I previously designed was loved a lot, so I designed a snowman made of three snowballs for this Christmas.

These three snowballed snowmen can rotate in each of the three parts of the head and body. The two arms can also move in different angles. You can also decorate the Christmas tree by attaching strings to the rings on the back.

When making the torso folded, the button must be inserted first.
When inserting a button, make sure to check the shape carefully. The same goes for the nose.
When inserting the shawl, apply a little force and open it to fit well.
Be sure to check out the video!

It goes well with the previously made snowman.
We wish you a happy Christmas.

Size, when all parts are fitted X 130mm, Y 64mm, Z 140mm

File 48.6 MB
  • Kvasir Creality CR-10SSimplify3D
    2020-12-22 04:28:15

    Hi. I want to buy this one but like to know if I can increase all the items? So when I increase the head to 200%, can I increase the body and head also and it will keep fitting?
    Tx for your feedback.

    Kvasir Creality CR-10SSimplify3D
    2020-12-22 04:29:40

    I mean “hat” to increase and then head and body.

    fab365 Administrator
    2020-12-22 09:44:35

    @Kvasir Yes you can. You can freely change the scale on the slicer.

  • roccop20 Creality Ender-3Cura
    2020-12-18 16:16:05

    Hi, do you think I could scale down this model? if so, how much?


    fab365 Administrator
    2020-12-22 09:46:16

    @roccop20 It is possible to reduce the scale. However, since the minimum size is different for each printer, please understand that it is difficult to guide.

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted