Foldable car G-wagen W460 230G

$ 4.79

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

The feature of this item is that it can print a tire that is elastic as if it were real.
Tire Filament: eSUN 1.75mm TPU 95A Flexible 3D Printer Filament
http://www.esun3d.net/products/317.html

The first foldable car I made, the G-wagen, was very popular. This has been the driving force behind me making so many foldable cars ever since. I also learned that there are many fans of G-wagen. And a number of G-wagen fans have asked for a three-door.
So this time, I made the 3-door G-wagen W460 230G with a foldable design in return for the support of G-wagen fans.

In designing this this time, I applied the most reliable structure based on my experience so far.

1. The living hinge has been changed to a mechanical hinge.
2. Designed so that tires can be printed separately and fitted.
3. The tire was tested and completed to be able to print with an elastic material similar to rubber.
4. If you simply paint the wheel with metallic paint, it is much better because it is different from the color of the body.


When expanded, Benz size = X 164mm, Y 149mm, Z 37mm / Tire size = X 22mm, Y 22mm, Z 7mm, After folding X 55mm, Y 114mm, Z 53mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4~2.6mm or Retraction Distance : 1.2mm, Retraction Vertical Lift : 0.6mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 100% / First Layer Width : 98% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 35%
Additions Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings PrusaSlicer
Simplify 3D Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 95% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 55%
Additions Raft : OK / Brim : NO / Support : NO
CR-10S Pro Slicing Settings Cura
Quality Layer Height : 0.1mm, 0.2mm / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Patten : Grid
Material Flow : 100% / Retraction Distance : 5.4mm
Build Plate Adhesion Raft / Raft Extra Margin : 3mm / Raft Air Gap : 0.3~0.32mm
File
File 23.1 MB
Average Time
[0.1mm] Benz : 16h 10m
[0.1mm] Tire : 1h 35m

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !