Foldable Mystery machine - Scooby Doo
$ 5.99
GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
Although there are 3D printers or devices that can print multiple colors at the same time, it is still difficult to say that the completeness is high. Setting is also difficult, and the amount and time of filament consumed in the purge box is quite large. So, I recently made some folding designs so that some can be printed and pasted according to the color or material. The reaction of 3D printer users to this was good, so I took this opportunity to design the main concept to print and attach parts separately according to color.
It was selected as the most suitable target as the Mystery Machine appearing in Scooby Doo, which recorded a large number of votes in Request.
The number of parts is so large that printing is a bit cumbersome, but the making process is very simple. Simply insert the parts to match the color and then fold. However, the upper part of the vehicle is a type that wraps the lower part, so you only need to pay attention to this. Please check the video for more details.
With this design, I'm going to think more about the color. Hope you enjoy 3D printing~
When expanded, size = X 158mm, Y 162mm, Z 42mm After folding X 65mm, Y 114mm, Z 70mm
I used esun sky blue, peak green, fiberlogy orange, black to print.
You can use the same color from another manufacturer.
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4~2.6mm or Retraction Distance : 1.2mm, Retraction Vertical Lift : 0.6mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 100% / First Layer Width : 98% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 35% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| PRUSA Slicing Settings | PrusaSlicer |
| PRUSA MK3 | Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 95% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 55% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| CR-10S Pro Slicing Settings | Cura |
| Quality | Layer Height : 0.1mm, 0.2mm / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Patten : Grid |
| Material | Flow : 100% / Retraction Distance : 5.4mm |
| Build Plate Adhesion | Raft / Raft Extra Margin : 3mm / Raft Air Gap : 0.3~0.32mm |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
How well will this scale up? With the 310x320 bed, I'd like to make it larger if none of the part would get messed up. Thanks!
@shane.cloyd9021
The bigger the better. You can print the maximum size within the bed size.
Boa noite,qual material usado?
@duda_cnc9239
It's PLA. We use esun sky blue, peak green, fiberlogy orange, black.
You can use the same color from another manufacturer.
Yes Please tell us the source of your filament colors! This would be an adorable project if those colors can be matched. Prusa has a Blue and Orange that is very close, but haven't found that shade of green yet.
@MacBert We use esun sky blue, peak green, fiberlogy orange, black.
You can use the same color from another manufacturer.
Good night! Please, what colors are used?
@VMAXIMO We use esun sky blue, peak green, fiberlogy orange, black.
Thank you very much. I'm definitely going to buy it.
Hello there my parts come out loose. Can you help me with the slicer settings please ? And there is a huge time difference between in our countries, so we can discuss on a live chat instead of chatting here.
@Kodama
Have you tried using Fab365 slicer settings?
Please refer to the page below.
https://fab365.net/help/43/how-to-download-slicer-setting
See also Fab365's Tips page.
https://fab365.net/print-tips-list
If you upload the photo, we can give you a more accurate answer.😉
Recently I ve changed my bearings and my belts. The hinges of the model fall apart when I take it off the builtplate. I ve tried different filaments and different models of your but it did not help me.Flow is ok and my calibration cube is perfect. After that Ive tried your slicer settings. With your settings hinges fuse together with the model and it does not work.
@Kodama
1) Do you use prusa slicer? Check that the extrusion width is 0.4mm. (img attached)
2) If joint sticking is a problem, it is an elephant foot.
3) If parts are falling off after printing is complete, the slicing setting is probably the problem.
For accurate answers, please send the slicer setting screen and printed model photos to help@fab365.net
awesome model!!!