Foldable Mystery machine - Scooby Doo

$ 5.29

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

Although there are 3D printers or devices that can print multiple colors at the same time, it is still difficult to say that the completeness is high. Setting is also difficult, and the amount and time of filament consumed in the purge box is quite large. So, I recently made some folding designs so that some can be printed and pasted according to the color or material. The reaction of 3D printer users to this was good, so I took this opportunity to design the main concept to print and attach parts separately according to color.
It was selected as the most suitable target as the Mystery Machine appearing in Scooby Doo, which recorded a large number of votes in Request.

The number of parts is so large that printing is a bit cumbersome, but the making process is very simple. Simply insert the parts to match the color and then fold. However, the upper part of the vehicle is a type that wraps the lower part, so you only need to pay attention to this. Please check the video for more details.

With this design, I'm going to think more about the color. Hope you enjoy 3D printing~

When expanded, size = X 158mm, Y 162mm, Z 42mm After folding X 65mm, Y 114mm, Z 70mm

I used esun sky blue, peak green, fiberlogy orange, black to print.
You can use the same color from another manufacturer.

File
File 72.3 MB
Material Color
esun peak green
esun sky blue
fiberlogy orange
fiberlogy black
  • gzaros2611 Creality Ender-3 ProCura
    2021-03-21 04:42:03

    Do you have recommended Cura 4.8 settings for a Creality Ender 3 v2?

    Thank you!

    fab365 Administrator
    2021-03-22 17:25:21

    @gzaros2611
    Please try the setting file of Fab365.
    https://fab365.net/help/43/how-to-download-slicer-setting.

    And the below help page is about how to import settings.
    https://fab365.net/help/29/how-to-import-fab365-cura-profile

  • manuelir8406 Creality Ender-3Cura
    2021-03-20 01:38:54

    ¿Qué modelo de cama utilizas para la Ender 3? ¿wham bam?

    fab365 Administrator
    2021-03-22 17:23:55

    @manuelir8406 We use Twotrees' PEI bed and Whambam Systems' PEX bed. Please refer https://fab365.net/pages/14013138305/best_3d_printer_bed

  • garthranzz12994 Cura
    2021-03-18 10:31:19

    I hope you are having a good day. I purchased the model, and am currently printing the body. I am using Cura 4.3 as my slicer, my printer is a Monoprice Cadet. Do you know if I might run into any issues with this setup?

  • shane.cloyd9021 Creality CR-10S ProCura
    2021-03-16 10:19:23

    How well will this scale up? With the 310x320 bed, I'd like to make it larger if none of the part would get messed up. Thanks!

    fab365 Administrator
    2021-03-17 17:43:34

    @shane.cloyd9021
    The bigger the better. You can print the maximum size within the bed size.

  • duda_cnc9239 Anet A8 PLUSCura
    2021-03-07 08:38:11

    Boa noite,qual material usado?

    fab365 Administrator
    2021-03-07 11:01:42

    @duda_cnc9239
    It's PLA. We use esun sky blue, peak green, fiberlogy orange, black.
    You can use the same color from another manufacturer.

  • MacBert
    2021-03-02 15:02:32

    Yes Please tell us the source of your filament colors! This would be an adorable project if those colors can be matched. Prusa has a Blue and Orange that is very close, but haven't found that shade of green yet.

    fab365 Administrator
    2021-03-02 15:43:50

    @MacBert We use esun sky blue, peak green, fiberlogy orange, black.
    You can use the same color from another manufacturer.

  • Creality Ender-3 ProSimplify3D
    2021-03-01 09:33:55

    Good night! Please, what colors are used?

    fab365 Administrator
    2021-03-02 15:43:08

    @VMAXIMO We use esun sky blue, peak green, fiberlogy orange, black.

    Creality Ender-3 ProSimplify3D
    2021-03-03 08:07:50

    Thank you very much. I'm definitely going to buy it.

  • Kodama Prusa i3 Mk3/Mk3sSimplify3D
    2021-02-16 22:44:11

    Hello there my parts come out loose. Can you help me with the slicer settings please ? And there is a huge time difference between in our countries, so we can discuss on a live chat instead of chatting here.

    fab365 Administrator
    2021-02-17 10:12:07

    @Kodama
    Have you tried using Fab365 slicer settings?
    Please refer to the page below.
    https://fab365.net/help/43/how-to-download-slicer-setting

    See also Fab365's Tips page.
    https://fab365.net/print-tips-list

    If you upload the photo, we can give you a more accurate answer.😉

    Kodama Prusa i3 Mk3/Mk3sSimplify3D
    2021-02-17 14:45:20

    Recently I ve changed my bearings and my belts. The hinges of the model fall apart when I take it off the builtplate. I ve tried different filaments and different models of your but it did not help me.Flow is ok and my calibration cube is perfect. After that Ive tried your slicer settings. With your settings hinges fuse together with the model and it does not work.

    fab365 Administrator
    2021-02-17 17:35:04

    @Kodama
    1) Do you use prusa slicer? Check that the extrusion width is 0.4mm. (img attached)
    2) If joint sticking is a problem, it is an elephant foot.
    3) If parts are falling off after printing is complete, the slicing setting is probably the problem.
    For accurate answers, please send the slicer setting screen and printed model photos to help@fab365.net

  • willow
    2021-02-16 18:41:23

    awesome model!!!

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted