Falcon 9 second stage

$ 2.99

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

The Falcon Rocket X has really won a lot of people. Accordingly, there is also a flood of requests to make related things. Among them, there were a lot of requests to make 'Second stage' as soon as possible with regret for excluding the 'Second stage'. So this time, the 'Second stage' was produced together with the 'Inter stage'.
The second stage and interstage we designed this time can be removed from the top two of the existing Falcon Rocket X components (this is the interstage and the second stage) and put them in place. Please refer to the video!

The composition of the parts is as follows.
cap1
cap2
cap3
PAF(Payload Attach Fairing)
second stage body
second stage booster
second stage inter stage

Caps 1, 2, and 3 are placed on the PAF and are used when the Second Stage returns to Earth.
In place of Caps 1, 2, and 3, previously produced fairings and satellites can be installed.

Stay tuned for the next Space X series!

Scale 1 : 66
Size, X 64mm, Y 64mm, Z 262mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4~2.6mm or Retraction Distance : 1.2mm, Retraction Vertical Lift : 0.6mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 100% / First Layer Width : 98% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 35%
Additions Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings PrusaSlicer
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 95% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 55%
Additions Raft : OK / Brim : NO / Support : NO
CR-10S Pro Slicing Settings Cura
Quality Layer Height : 0.1mm, 0.2mm / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Patten : Grid
Material Flow : 100% / Retraction Distance : 5.4mm
Build Plate Adhesion Raft / Raft Extra Margin : 3mm / Raft Air Gap : 0.3~0.32mm
File
File 61.2 MB
  • Deleted

  • happyman.reiter@gmail.com
    2021-08-14 04:29:38

    Are there any supports needed when printing the file named 'CE3PRO_Fab365_Foldable_Falcon9_Joint'?

  • fractalsauce
    2021-05-15 03:17:29

    Can you tell me what brand and color filament you use for the metallic looking engine please? I love how it looks. And thanks for your designs!

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted