Easter bunny bank(Foldable)
$ 3.99
GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
The original meaning of Easter is also important, but most people think of eggs and rabbits at Easter. And also, ordinary people think that small sharing with neighbors is a day that brings joy. I designed a rabbit piggy bank with these two things. You can also put coins in this piggy bank, but you can also put small snacks as a gift.
Even if it's not Easter, the piggy bank is still valid. Although there has been a lot less use of coins, there are still many places and areas where coins are used.
So I designed a rabbit piggy bank. Easy to fold, easy to insert and take out coins.
The size of the coin hole is designed to accommodate 25 cents of US coins. It is large enough to fit most national coins.
I hope you will remember the preciousness of small money and the joy of sharing through this piggy bank.
Size, X 76mm, Y 124mm, Z 105mm
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4~2.6mm or Retraction Distance : 1.2mm, Retraction Vertical Lift : 0.6mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 100% / First Layer Width : 98% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 35% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| PRUSA Slicing Settings | PrusaSlicer |
| PRUSA MK3 | Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 95% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 55% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| CR-10S Pro Slicing Settings | Cura |
| Quality | Layer Height : 0.1mm, 0.2mm / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Patten : Grid |
| Material | Flow : 100% / Retraction Distance : 5.4mm |
| Build Plate Adhesion | Raft / Raft Extra Margin : 3mm / Raft Air Gap : 0.3~0.32mm |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
Can I ask, what is the bed size requirements for printing the Main Body? The size listed appears to be for the finished Bunny Bank once assembled.
My nieces loved their easter gifts this year, the younger one is obsessed with excavators for some reason. Thank you for the excellent designs.
We highly appreciate you sharing this photo of the Easter bunny and Excavator! The pinky color is brilliant! 😍 We are very pleased to hear that your nieces like our models.
Thank you for kind words and your support.