Piranha Plant- Extendable Scissors
$ 3.49

GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
I don't like to play or to be pranks. I don't think it's bad for a light joke that can be laughed off moderately. That's enough to play with fun stuff, but I've been thinking about such a product for a long time.
Then it was this product that I came up with.
This flower is popular with many gamers because of its appearance that is deadly to the main character in the game, but not at all intimidating. So, we designed a product that can be played lightly by utilizing the shape and movement of this flower.
To realize this idea, the structure of the existing Extendable Scissors has been improved a lot and designed to be more robust and smooth.
The making process is very easy. However, when inserting the lips with teeth, use the elasticity to slightly open and insert. And the number of teeth is different, so check them carefully before inserting them.
The dots attached to the head are different in size, so please check them carefully before attaching them.
Please check the video carefully for the process of making this.
※ Please refrain from playing too dangerous with this.
Largest part in printing, size = X 78mm, Y 110mm, Z 13mm, After full assembly size= X 120mm, Y 110mm, Z 58mm
PRUSA Slicing Settings | Simplify 3D |
---|---|
Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4~2.6mm or Retraction Distance : 1.2mm, Retraction Vertical Lift : 0.6mm |
Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
First Layer Settings | First Layer Height : 100% / First Layer Width : 98% / First Layer Speed : 50% |
Infill | Interlor Fill Percentage : 10% / Outline Overlap : 35% |
Additions | Raft : OK / Brim : NO / Support : NO |
PRUSA Slicing Settings | PrusaSlicer |
PRUSA MK3 | Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO |
Ender Slicing Settings | Simplify 3D |
Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm |
Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
First Layer Settings | First Layer Height : 120% / First Layer Width : 95% / First Layer Speed : 50% |
Infill | Interlor Fill Percentage : 10% / Outline Overlap : 55% |
Additions | Raft : OK / Brim : NO / Support : NO |
CR-10S Pro Slicing Settings | Cura |
Quality | Layer Height : 0.1mm, 0.2mm / Line Width : 0.4mm |
Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
Infill | Infill Density : 20% / Patten : Grid |
Material | Flow : 100% / Retraction Distance : 5.4mm |
Build Plate Adhesion | Raft / Raft Extra Margin : 3mm / Raft Air Gap : 0.3~0.32mm |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
#car
#space
???