X wing


You can download 1 free item per free ticket.

0Free item ticket
Free ticket?


GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

Fab365.net is constantly growing. With challenging and diverse attempts, 3D printing design technology is growing and improving day by day. This is thanks to our customers, and in order to reward them, we are always trying to make what they have requested from our customers.
So this time, I designed the Star Wars X-wing, which has been the number one request for a long time.

I'm obsessed with dividing color parts these days. This is because it brings out the charm of 3D printing by combining the colors of the filament well. There are a few parts, but I hope you can feel the charm of the filament color combination through this design.

Things to note when assembling are as follows.

1. When connecting the upper and lower parts of the fuselage, there are parts that are inserted on the left and right. When connecting the fuselage parts, be careful to connect the fuselage while pressing these parts strongly left and right.
2. It is good to use adhesive to attach color parts, but it can be confusing, so please check the location carefully before using adhesive.
3. The laser gun at the tip of the wing is connected by sliding it. However, you have to push it all the way to the end to insert it, so please check it carefully.
4. Before assembling the wing and fuselage, it is recommended to glue the deflector shield projector of the wing first.

Please check the video for more details.

1 : 72 Scale
Largest part in printing, size = X 144mm, Y 55mm, Z 36mm, After full assembly size= X 149mm, Y 176mm, Z 30mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4~2.6mm or Retraction Distance : 1.2mm, Retraction Vertical Lift : 0.6mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 100% / First Layer Width : 98% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 35%
Additions Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings PrusaSlicer
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 95% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 55%
Additions Raft : OK / Brim : NO / Support : NO
CR-10S Pro Slicing Settings Cura
Quality Layer Height : 0.1mm, 0.2mm / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Patten : Grid
Material Flow : 100% / Retraction Distance : 5.4mm
Build Plate Adhesion Raft / Raft Extra Margin : 3mm / Raft Air Gap : 0.3~0.32mm
File 13.7 MB
Average Time
[0.1mm] Canopy : 30m
[0.1mm] Fuselage : 6h 30m
[0.1mm] Rear Fuselage : 30m
[0.1mm] Generator : 30m
[0.1mm] Wing : 7h 30m
[0.1mm] Wing Upper Parts : 1h 30m
[0.1mm] Wing Under Parts : 1h 30m
[0.1mm] Engine-A : 30m
[0.1mm] Engine-B : 35m x3
[0.1mm] Laser Tip : 10m x4
[0.1mm] Yellow Parts : 10m
[0.1mm] Red Parts : 30m
[0.1mm] Grey Parts : 20m x4
[0.1mm] Pedestal : 7h 30m
  • koturmdq
    2021-08-08 06:11:58

    Fab365, thank you for existing and releasing designs for free :), in my family we love your designs, we will see how this beautiful ship comes out. Recommended Infill?

    2021-08-08 17:12:38

    You are welcome! I use 20% infill usually.
    I hope you enjoy this design.

  • jayle
    2021-08-06 11:31:42

    Model is awesome. It would be great to have printable inserts for the windows so I don't have to look at my terrible painting.

    2021-08-06 14:40:57

    Thanks for your nice comments! We will consider your comments next time. Your prints are great too!

  • nflyer
    2021-08-04 03:20:27

    can i print with Saturn ?

    2021-08-05 12:10:48

    We didn't test with resin 3D printer.

  • luckygfarm635982
    2021-08-03 07:32:01

    This model went together great. Love it.

    2021-08-05 12:11:57

    Thank you for your comment.
    I'd love to see your photo review.

  • SnowEagle
    2021-08-03 05:22:44

    I like all the colorful inserts, really adds to the excellent design. Would loved to have seen a Rebel Alliance insert on the stand

    2021-08-05 12:14:51

    We are very glad that you like our design.
    Enjoy our designs, and we look forward to your photo reviews.

    2021-08-24 02:01:08

    I second this request. Make an insert on the pedestal, so we can have the Rebel Alliance insignia in red. I think that would add to the overall design. Even a double insert so we can have the pedestal one color, the outer circle in another color and the actual insignia in red...

  • CamperPaul
    2021-08-01 21:46:21

    Schönes Star Wars Modell.

    Ender3 Pro

    2021-08-05 12:17:38

    Your print is so perfect! Thank you for your photos and reviews.

  • 3ddadcreations8273
    2021-07-31 10:55:55

    I love you guys thanks for the likes on my Instagram

    2021-08-05 12:16:43

    Thanks for your Instagram review.
    We would appreciate it if you could post a photo in our review as well.

  • luckygfarm635982
    2021-07-31 05:56:56

    What is the differance between engine A and Engine B?

    2021-08-02 22:10:30

    they seem to have a slight different design. does the x3 mean we need 3 of them and 1 of the other?

    ive just seen the single engine has the cut out for the yellow piece

    2021-08-05 12:18:48

    Engine A is supposed to have yellow parts, B doesn't.

  • SnowEagle
    2021-07-30 04:02:52

    Please check the Main Wing bracing It does not workout when sliced with Prusa Slicer.

    2021-07-30 13:11:25

    Please check default extrusion width and mores.
    You should change to all 0.4mm

    2021-07-30 23:07:36

    Thanks that worked perfectly, please keep up the GREAT Designs.

    2021-08-14 16:10:34

    Do you have any special recommendations for Ender 3 with Cura? I printed every part without any problem. But just the wings I can't get to work.

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted