Millennium Falcon

FREE

You can download 1 free item per free ticket.

0Free item ticket
Free ticket?
Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

Fab365.net is constantly growing. With challenging and diverse attempts, 3D printing design technology is growing and improving day by day. This is thanks to our customers, and in order to reward them, we are always trying to make what they have requested from our customers.
So, in response, we designed the Millennium falcon from Star Wars, which many customers have requested.

I designed the millennium falcon to be printed and assembled without the need for support by dividing the shape inspired by pizza slices.
And above all, we created the maximum possible detail that can be expressed with a 0.4mm nozzle. And detailed shapes that cannot be expressed with a 0.4mm nozzle are omitted.

Each part is engraved with an alphabet so customers don't get confused when assembling it. If you look at this and fit it, you can fit the parts into the correct position.
Depending on the condition of the printer, parts may be loose. In this case, please use adhesive to attach it.

Please check the video for detailed assembly process.

Additionally, we plan to design a stand to display the millennium falcons nicely. We look forward to seeing many of you.

1/144
Largest part in printing, size = X 130mm, Y 130mm, Z 96mm, After full assembly size= X 182mm, Y 245mm, Z 60mm

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4~2.6mm or Retraction Distance : 1.2mm, Retraction Vertical Lift : 0.6mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 100% / First Layer Width : 98% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 35%
Additions Raft : OK / Brim : NO / Support : NO
PRUSA Slicing Settings PrusaSlicer
PRUSA MK3 Layer Height : 0.1mm, 0.2mm / Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 95% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 55%
Additions Raft : OK / Brim : NO / Support : NO
CR-10S Pro Slicing Settings Cura
Quality Layer Height : 0.1mm, 0.2mm / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Patten : Grid
Material Flow : 100% / Retraction Distance : 5.4mm
Build Plate Adhesion Raft / Raft Extra Margin : 3mm / Raft Air Gap : 0.3~0.32mm
File
File 59.8 MB
Average Time
Millennium Falcon Cockpit : 2h 30m
Millennium Falcon Fuselage : 21h
Millennium Falcon Armor plates-A : 7h 30m
Millennium Falcon Armor plates-B : 7h 30m
Millennium Falcon Armor plates-C : 2h 30m
Millennium Falcon Armor plates-D : 3h
Millennium Falcon Armor plates-E : 3h 30m
Millennium Falcon Armor plates-F : 3h 30m
Millennium Falcon Boarding ramp : 1h
Millennium Falcon Drive units : 12h 30m
Millennium Falcon Landing box : 6h
Millennium Falcon Landing gear : 3h
Millennium Falcon Side detail : 45m
Millennium Falcon Main sensor antenna : 45m
Millennium Falcon Quad laser cannon : 25m
  • andre.bellato9562
    2022-07-05 08:17:31

    My double sized Millenium Falcon

  • fede_sh8730
    2022-05-15 07:48:38

    I wanted to thank fab365 for this magnificent project millenium falcon. stl is very easy to print and is really well done. lho printed at 245%, 60 cm long

  • johannesb3042
    2022-04-28 04:33:39

    Awesome model thanks I had so much fun building this. Made one scaled 50% mostly still works fine except some of the smaller parts need glue

  • crochockey841408
    2022-03-23 23:34:30

    Good morning, love this Falcon design and it rocks!!! I am having an issue with part E of the armor plates. I am using Adobe Photo Studio for this print as our school is using the Dremel 3D 40 and 3D45 printers. The other pieces have thrown minor repairs which have been resolved. But part E is getting hung up with 100+ errors, no manifold ventricles.

    Any help is much appreciated this is the coolest falcon model out there. Thank you so much for your hard work.

    Kindly

    Steve

  • marciofsilva
    2022-03-16 22:48:32

    Amazing project. I printed everything at once. 2 days and 14 minutes.(0.2 layer, PLA and 70 or 75 mm/s
    But. I don't think I should have used raft(brim maybe). It's very difficult to remove.
    After I assemble everything I'll edit the post later with the photo
    DO NOT USE RAFT or use with settings that you really sure that you will not lose all of your prints as did do I
    Thank you

    sadisticdom993963
    2022-07-02 03:28:50

    Your material looks very brittle. Why not use Blue disappearing glue stick on the hot surface so it sticks and it's easy to remove?

  • speysscott6580
    2022-01-07 05:56:40

    Fantastic design! I'm part way through printing it and the quality is outstanding! I'm printing it at 100% and I'm curious what is the smallest anyone has seen it printed with a .4mm nozzle? I'd like to make some small ones for gifts for a few friends.

  • gunner0352
    2022-01-06 22:40:31

    As always the design is amazing. Super easy to print and looks terrific.

  • scott3646
    2022-01-04 23:01:58

    A brilliant model. I printed mine on an Ender 3 at 0.16 layer height at 45mm/s. I think I might be under extruding as most of the parts fit loosely. But I think that's my printer, not the model.

    fab365
    2022-01-05 16:53:44

    Thank you. You can increase extrusion.
    Please enjoy~

  • rick.broida7151
    2022-01-02 23:58:10

    Incredible model! Mine came out great except for the landing gear…can’t get the pieces into the feet, the pegs are simply too thick and misaligned when folded. Tried printing the feet slightly larger, still no go.

  • hoy0012137
    2021-12-30 01:30:50

    i combined the forward parts and the backward parts into two stl and sliced them at an angle of 45 degrees and 50% scale. even at this scale, the details are amazing. 45 degrees cost a lot of time and supports but you will have nearly no printlines.

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted