It is the second series of desktop lighting. Its difference from the first series is that the width between frames is wider by changing the direction of the frame, and that it shows a little more mechanic look than series 1. The bulb, with the mechanical structure of weaving pattern, was designed in harmony with the most common type of curve.
The bidirectional frame that intersects missed seems very weak, but in fact it is very strong as it is entangled and swirled mutually in opposite direction. This structure uses less materials, while has less transformation by impact and force from several angles. Also this structure has a wide space among frames, and by allowing the heat to be easily discharged to this empty space it will not be transformed by the heat of illumination.
Aesthetically, it gives a feeling of being the oriental bamboo crafts as if you watch artistic handcrafts.
The interior lighting fixture was made to be easily produced by combining it with cheap lighting part that you can find from around, and repaired. However, you must use only LED bulb, because the common light bulb can be transformed as it emits lots of heat.
It was divided in small size by considering the maximum printing-out size of common desktop FDM 3D printer for more people to have this lighting fixture. Therefore, anyone who can have 3D printer or who can use it, though it is not an expensive 3D printer, can print it out.
Also it was designed to print out with some support in order to quit support, to finish and to reduce the process stress. And it was designed for anybody, though he cannot trim a support, to get a good result by preventing its trace from coming out in the way that support is generated inside even in case of needing a support. Of course, you will get the better product if printing out with a printer that allows the better result than FDM (for example, SLA, DLP, SLS etc.).
Each part of them was designed to combine with a small clip, and needing not much force to insert and quit it its coherence is rather so strong that it cannot be easily separated.
It can be used at anywhere including office, library, living room, bedroom etc., and can produce several atmospheres according to the brightness of bulb. Its whole size is 19cm (width) x19cm (depth) x31cm (height).
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 30% |
| Additions | Raft : OK / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extuder | Nozzle Diameter : 0.4mm / Retraction Distance : 4mm |
| Layer Settings | Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50% |
| Infill | Interlor Fill Percentage : 10% / Outline Overlap : 40% |
| Additions | Raft : OK / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
Already purchased this lamp, was disappointed that it didn't include a single piece version of the main body sections. Can we get that? I don't need it sliced up into so many pieces and would greatly prefer to print the major pieces ("base", "top", etc) as single parts rather than sections I have to clip or glue together.