Morris Mini Cooper-S Rally

$ 4.99

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

Long loved by many, the Mini Cooper also excelled in auto racing, the most famous of which was its multiple victories in the Monte Carlo Rally.
This racing revamped Mini Cooper is loved by many for its historical fact and the beauty of its revamped look.
This time, I designed this Monte Carlo Rally version of the Mini Cooper.

The assembly process is similar to the previously designed Mini Cooper, but with a few caveats.

The number plate is different on the left and right. The door leaf, black license plate, and yellow license plate each have matching protrusions and dents, so please check them carefully. These may be difficult to see due to their small size, so please check them carefully before slicing.

The fender that surrounds the wheel must be attached first before attaching the lower body.
The shape of the front and back of the fender is different, so please match and confirm before attaching.

Printing on Ender 3D printers and assembling video

Flexible build bed link
Metal look filament link
Tire filament link
Super glue link

67 Monte Carlo Rally winner

1 : 38 Scale
Largest part in printing, size = X 92mm, Y 106mm, Z 20mm, After full assembly size= X 42mm, Y 84mm, Z 36mm
Total Build time : 17h / Plastic weight : 63g

File
File 26.1 MB
Average Time
[0.1mm] Rally Roof : 45m / 4g
[0.1mm] Rally Roof-Carrier : 6m / 1g
[0.1mm] Rally Body : 8h 30m / 30g
[0.1mm] Rally Window : 1h / 3g
[0.1mm] Rally Radiator grille : 10m / 1g
[0.1mm] Rally Light : 5m / 1g
[0.1mm] Rally 177-Yellow : 16m / 1g
[0.1mm] Rally 177-Black : 16m / 1g
[0.1mm] Rally Plate-White : 5m / 1g
[0.1mm] Rally Plate-Red : 3m / 1g
[0.1mm] Rally plate-Black : 5m / 1g
[0.1mm] Rally Bumper : 15m / 2g
[0.1mm] Rally Fender : 15m / 1g
[0.1mm] Rally Underbody : 3h 30m / 10g
[0.1mm] Rally Wheel : 30m / 2g
[0.1mm] Rally Tire : 1h / 3g

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !