GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
Among the designs of Fab365, the heavy-duty series is very popular. In order to continue its popularity, we designed a forklift truck this time.
The forklift designed this time reproduces almost all the movements of the actual forklift.
Please note the following when assembling.
1. Before assembling, please remove the printed support with the Mast first.
2. And move the Mast several times to make it move smoothly.
3. The yellow part of the counter weight should be connected in the middle first and then on both sides.
4. Connect the forks by putting on the top first and then pushing the bottom part in.
For more details on assembling, please check the video.
Printing on prusa and assembling video ➪
Flexible build bed link ➪
Yellow(Gold color) filament PLA link ➪
Dark grey(Stealth grey) filament PLA link ➪
Super glue link ➪
1 : 35 scale
Largest part in printing, size = X 66mm, Y 64mm, Z 18mm, After full assembly size= X 37mm, Y 104mm, Z 60mm
Total Weight = 40.7g
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !Write Review