Horror house - Inspired by 'Evil dead'

$ 4.49

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

Halloween needs a spooky vibe. The haunted house is representative of this atmosphere.
This time I designed a haunted house that captures that eerie atmosphere very well.

One of the most representative films of the haunted house is 'The Evil Dead'. This design was inspired by the house, the main setting in the movie 'The Evil Dead'.
When I first saw this movie, I was so scared that I couldn't sleep, but now I see it as an action drama.

This haunted house can be used as a light by putting an LED D-light candle inside, and when you put the LED light in a dark room and turn it on, it is like watching a scene from a horror movie.

The process of printing and finishing is as follows.

First, turn the wall with the door to stand up, and align it with the protrusion of the wall next to it.
After aligning the roof, place it on the protrusion on the wall and insert it.
Glue the 4 pillars to the hole in the underside of the roof and the hole in the deck in front of the door with glue.
Connect the floor surface to the lower floor of the house.
The bottom surface can be easily removed and attached, so you just have to remove the bottom surface, put the lights on, and then close the floor again.
Please check the video for the detailed process.

Printing on Prusa 3D printers and assembling video

Happy halloween~

Military Khaki(Wood color) filament PLA link

Largest part in printing, size = X126mm, Y 110mm, Z 76mm, After full assembly size= X 120mm, Y 127mm, Z 88mm

Total Weight = 141g

File
File 10.7 MB
Average Time
[0.1mm] Wall : 17h / 65g
[0.1mm] Roof : 12h 30m / 48g
[0.1mm] Floor : 3h 50m / 16g
[0.1mm] Chimney : 3h / 11g
[0.1mm] Pillar : 20m / 1g
  • leons0092297
    2022-11-22 16:58:26

    can i use this Model on resin impression ??

  • Deleted

  • CaptainAwe-sum
    2022-10-29 00:45:10

    Man, if you could design us an Ash to put out in front of this, it would be awesome!

    fab365
    2022-10-31 19:44:10

    😆😆😆

  • ian9728
    2022-10-21 22:47:21

    Which brown filament did you use for this?

    fab365
    2022-10-22 02:02:29

    Filament link - https://ebay.us/6L1TUh

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !