Store | Gadget

Pencil Case

$ 0.99

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

It was made as a pencil case but is good to be used for various purposes to contain several things.

The bidirectional frame that intersects missed seems very weak, but in fact it is very strong as it is entangled and swirled mutually in opposite direction. This structure uses less materials, while has less transformation by impact and force from several angles.

The benefit of this product is you can find thing inside easily cause you can see inside between frames.

The size of this pencil case is width 93mm x depth 93mm x height 104mm. so it can be easily printed out at once by most of desktop printer. but when you think the size si too big, you can reduce a little.
It was designed to get a high quality result when printing it from a low-priced FDM 3D printer, and to get a clean output without a post-process.

Most of data in this service have suitable color, but this pencil case is good for any other color that you want.

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 16.4 MB
Recommend Print
Ultimaker 2+
Ultimaker 3
Makerbot Replicator 2
Material Color
All
Average Time
[0.2mm] 11h
[0.1mm] 40h

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !