Messerschmitt Bf 109E-4

$ 5.99

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

This design is the second series of WWII aircraft.
It is relatively small on the same scale and has thin wings, so rather than making many movable parts, I tried a lot of color separation.
And I tried to express the engine inside.
The movable parts are the flaps of the main wing and the propeller.
The vertical tail fins do not move, they are only color-separation, so please attach them with glue.

※ Precautions
1. After printing, the custom support must be removed first.
2. Cross parts must be printed in 0.1mm unconditionally. The cross parts are so thin that the shape cannot be accurately represented unless printed in 0.1mm layers.
Additionally, it is recommended to set (Simplify)Outline overlap, (Cura)Skin Overlap Percentage, and (PrusaSlicer)Overlap (Infill/perimeters overlap) to 10~20% in the slice settings.
3. The cross of the wing and fuselage are slightly different in thickness and size, so you need to match them before attaching them.

Printing on Ender 3 3D printer video
Printing on Prusa 3D printer video

We plan to make a display stand later. Please look forward to it!

1 : 48 Scale
Largest part in printing, size = X 63mm, Y 103mm, Z 104mm, After full assembly size= X 208mm, Y 188mm, Z 78mm
Total Build time : 22h 20m / Plastic weight : 65g

PRUSA Slicing Settings Simplify 3D
Extruder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm or 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80%
Infill Interior Fill Percentage : 15% / Outline Overlap : 30%
Additions Raft : NO / Brim : NO / Support : NO
PRUSA Slicing Settings Prusa Slicer
PRUSA MK3 Layer Height : 0.1mm or 0.2mm / Raft : NO / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extruder Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm
Layer Settings Layer Height : 0.1mm or 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50%
Infill Interior Fill Percentage : 15% / Outline Overlap : 30~40%
Additions Raft : NO / Brim : NO / Support : NO
Ender Slicing Settings Cura
Quality Layer Height : 0.1mm or 0.2mm / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Pattern : Grid
Material Flow : 100% / Retraction Distance : 5.4mm
Additions Raft : NO / Brim : NO / Support : NO
CR-10S Pro Slicing Settings Cura
Quality Layer Height : 0.1mm or 0.2mm / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Pattern : Grid
Material Flow : 100% / Retraction Distance : 5.4mm
Additions Raft : NO / Brim : NO / Support : NO
File
File 20.2 MB
Average Time
[0.1mm] Propeller : 1h 20m / 3g
[0.1mm] Engine : 1h 30m / 4g
[0.1mm] Cover-A : 1h 40m / 5g
[0.1mm] Cover-B : 1h / 2g
[0.1mm] Canopy : 1h / 3g
[0.1mm] Fuselage : 10h 30m / 35g
[0.1mm] Flap : 1h / 2g
[0.1mm] Tailplane : 1h 20m / 2g
[0.1mm] Tailplane Support : 10m / 1g
[0.1mm] Rudder : 30m / 1g
[0.1mm] Cross : 1h 20m/ 4g
[0.1mm] Mainwheel-A : 30m / 1g
[0.1mm] Mainwheel-B : 20m / 1g
[0.1mm] Tailwheel : 10m / 1g
  • nicoviale9594
    2023-01-21 09:36:57

    Up to what scale is it recommendable to reduce it, I don't want it that big

    fab365
    2023-01-21 14:24:22

    We don not recommend to reduce scale.

  • d.mcmurdo3210
    2023-01-13 05:12:52

    Can i please ask what glue you are using with the brush, thank you

    fab365
    2023-01-13 12:34:03

    I use this glue.
    https://www.shop.fab365.net/loctite

  • DistractedGEEK
    2023-01-12 04:03:21

    Oh hell yeah! I can't wait to build this! Will the landing gear be retractable? When will you posting the print build video?

    fab365
    2023-01-12 21:52:49

    We released youtube video.
    https://youtu.be/INVu_aQxp70
    Please enjoy~

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !