Toaster shape popping up SD card Holder

$ 3.49

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf.   This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.

I've designed toaster-type SD card holders before.
Many people have commented that the design is great, but it's very unfortunate that the SD card doesn't pop up. But at the time, my design skills weren't that good, so I couldn't design the popping up device.
But now, after several years, I have accumulated a lot of 3D printing design experience and skills, so this time I designed a toaster-shaped SD card holder in which the SD card pops up.

1. When printing text, we recommend using Brim.
2. If you press the lever too hard, it may break, so be careful.
3. If you print it big, you can also put CF cards or Nintendo Switch game cards/packs.
4. If you apply sewing machine oil or grease to moving parts before assembling, they will move better.
5. When printing silky silver, you can get a more shiny result by driving the seam in one direction rather than Random. In the slicer, it is mainly determined by items such as Z seam alignment, Z seam position, and Start point.
Please refer to the printer settings below.

Printing on Ender 3 3D printer video

Through this design, I was able to see how much the designs of Fab365 and myself have evolved. In the future, Fab365 and I will strive for more enjoyable 3D printing with better technology design.

Largest part in printing, size = X 98mm, Y 37mm, Z 38mm, After full assembly size= X 58mm, Y 37mm, Z 41mm
Total Build time : 6h 25m / Plastic weight : 33g

PRUSA Slicing Settings Simplify 3D
Extruder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
Start Points / Choose start point closest to specific location X : 125, Y : 115
First Layer Settings First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80%
Infill Interior Fill Percentage : 15% / Outline Overlap : 30%
Additions Raft : NO / Brim : NO / Support : NO
PRUSA Slicing Settings Prusa Slicer
PRUSA MK3 Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Raft : NO / Brim : NO / Support : NO
Advanced Seam Position : Aligned / Fill gaps : check / Perimeter generator : Arachne
Ender Slicing Settings Simplify 3D
Extruder Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm
Layer Settings Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
Start Points / Choose start point closest to specific location X : 125, Y : 115
First Layer Settings First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50%
Infill Interior Fill Percentage : 15% / Outline Overlap : 30~40%
Additions Raft : NO / Brim : NO / Support : NO
Ender Slicing Settings Cura
Quality Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Pattern : Grid
Material Flow : 100% / Retraction Distance : 5.4mm
Additions Raft : NO / Brim : NO / Support : NO
Walls Z Seam Alignment : User Specified
Z seam Position/ Back / X : 125 / Y : 115
Seam Corner Preference : Hide Seam
CR-10S Pro Slicing Settings Cura
Quality Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Pattern : Grid
Material Flow : 100% / Retraction Distance : 5.4mm
Additions Raft : NO / Brim : NO / Support : NO
Walls Z Seam Alignment : User Specified
Z seam Position/ Back / X : 125 / Y : 115
Seam Corner Preference : Hide Seam
File
File 15.7 MB
Average Time
[0.1mm] Part B : 15m
[0.1mm] Part A : 10m
[0.1mm] Letter : 15m
[0.1mm] Cover : 2h 10m
[0.1mm] Body : 3h 35m
  • mrtom_ak
    2023-05-30 09:58:09

    Fun little print! Make sure you read the instructions 0.1… yup. 😉

    fab365
    2023-05-30 15:05:25

    Hi mrtom_ak

    Thank you for sharing your print! To receive one point to your account for sharing, please post it on the review page.

    Thank You

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !