Foldable Tank TIGER-I Version-2
$ 5.99
GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
The first folding tank I designed, the Tiger, was a huge hit. However, it was the first time I made a tank with a folding design, so there was a bit of a disappointment. However, while designing several tanks, these parts were improved, and as a result, new tanks made with the improved design also gained popularity.
Numerous customers who have seen this have requested that the improvements be applied to the Tiger tank, the first folding tank, to be remade. In order to respond to that request, we have now created the Tiger tank version 2.0.
And this Foldable Tiger 2.0 version refers to Tiger 131, one of the previous models.
The difference between the previous Tiger tank version 2.0 and the previous version 1.0 is as follows.
1. I improved the design by adding decorations to the track to make it much closer to the real thing. Compared to the previous 1.0 version, you will feel the huge difference.
※ However, the structure is the same as the previous Track. Please refer to the customer reviews and comments of previously created tanks for problems with Track.
2. I changed the way to print and fit the wheels separately. The wheel of version 1.0 had the advantage of being easy to print at once, but the shape was very different from the actual one. However, this time by allowing the wheels to be printed separately, it has been improved to be much more realistic.
3. A cleaner result can be obtained after completion by removing the front living hinge.
4. Improved to print and attach pipes/hoses separately on the back. These parts partially cover the parting lines, so a more complete result can be obtained.
I received a great response from the makers with my foldable design, so I was able to continuously develop foldable design techniques. So things that seemed impossible at first are now possible little by little, and 3D printing seems to be getting more fun and fun. According to your continuous response, I will make a better design and will not stay at version 2.0, but will develop to 3.0, 4.0, etc.
Thank you~
Please enjoy~
1 : 48 scale
Largest part in printing, size = X 129mm, Y 177mm, Z 111mm, After full assembly size= X 83mm, Y 185mm, Z 64mm
Total Build Time : 42h 31m / Plastic Weight : 168.9g
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extruder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
| Layer Settings | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80% |
| Infill | Interior Fill Percentage : 15% / Outline Overlap : 30% |
| Additions | Raft : NO / Brim : NO / Support : NO |
| PRUSA Slicing Settings | Prusa Slicer |
| PRUSA MK3 | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Raft : NO / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extruder | Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm |
| Layer Settings | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50% |
| Infill | Interior Fill Percentage : 15% / Outline Overlap : 30~40% |
| Additions | Raft : NO / Brim : NO / Support : NO |
| Ender Slicing Settings | Cura |
| Quality | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Pattern : Grid |
| Material | Flow : 100% / Retraction Distance : 5.4mm |
| Additions | Raft : NO / Brim : NO / Support : NO |
| CR-10S Pro Slicing Settings | Cura |
| Quality | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Pattern : Grid |
| Material | Flow : 100% / Retraction Distance : 5.4mm |
| Additions | Raft : NO / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
He's all alone now.
Hi, I'm considering zooming in to 200%. To a scale of 1/24, if a turret hatch can be designed.
Hi, Good day, is there any option for payment methods?, i only have Paypal Account, hope to hear from you, thanks