Heavy Equipment replacement Parts
$ 3.49
GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
※ Precautions ※ Heavy equipment vehicles are not included.
The fun of heavy equipment is that you can often change some parts to use them for different functions. Of course, because of these characteristics, many customers have asked me to design various pieces of equipment that can be replaced with the heavy equipment I designed.
However, when designing heavy equipment, I was hesitant because I did not design with such replacement in mind from the beginning, but after various researches, I found a solution and designed it this time.
The replacement equipment is as follows.
1. SheepsFoot Roller - Road Roller
2. Single Ripper - Crawler Dozer
3. Hydraulic Breaker - Excavator
These interchangeable machine parts are easily interchangeable, so you can swap them out for pre-made heavy machines or reprint and install them.
Please check the video for replacement method.
Print and replace parts video ➪
※ Precautions ※ Heavy equipment vehicles are not included. The download link for the heavy equipment is as follows.
Road Roller STL ➪
Crawler Dozer STL ➪
Excavator STL ➪
1 : 48 scale
Largest part in printing, size = X 35mm, Y 35mm, Z 46mm
Total Build Time : 5h 50m / Plastic Weight : 24g
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extruder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm / Retraction Vertical Lift : 2.0 ( Only H-Breaker_B ) |
| Layer Settings | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80% |
| Infill | Interior Fill Percentage : 15% / Outline Overlap : 30% |
| Additions | Raft : NO / Brim : NO / Support : NO |
| PRUSA Slicing Settings | Prusa Slicer |
| PRUSA MK3 | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Raft : NO / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extruder | Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm / Retraction Vertical Lift : 2.0 ( Only H-Breaker_B ) |
| Layer Settings | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50% |
| Infill | Interior Fill Percentage : 15% / Outline Overlap : 30~40% |
| Additions | Raft : NO / Brim : NO / Support : NO |
| Ender Slicing Settings | Cura |
| Quality Layer | Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Pattern : Grid |
| Material | Flow : 100% / Retraction Distance : 5.4mm / Z Hop Height : 2.0mm ( Only H-Breaker_B ) |
| Additions | Raft : NO / Brim : NO / Support : NO |
| CR-10S Pro Slicing Settings | Cura |
| Quality | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Pattern : Grid |
| Material | Flow : 100% / Retraction Distance : 5.4mm / Z Hop Height : 2.0mm ( Only H-Breaker_B ) |
| Additions | Raft : NO / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
