Ghost ship lighting
$ 5.99
GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
I designed a ghost ship as a Halloween-appropriate item.
This ghost ship was designed to be used as a light as well.
A lot of effort was put into expressing the withered trees and torn sails to match the eerie atmosphere of the ghost ship.
Despite the numerous details, it is very simple to make.
I designed it to include two LED tea lights so that it is brighter and more light leaking from the inside can be seen.
Please check the video for details on how to make it.
I hope you have a happy Halloween by decorating with these lights.
Happy halloween~
Largest part in printing, size = X 92mm, Y 78mm, Z 134mm, After full assembly size= X 108mm, Y 276mm, Z 218mm
Total Build Time : 63h 8m / Plastic Weight : 216.1g
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extruder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
| Layer Settings | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80% |
| Infill | Interior Fill Percentage : 15% / Outline Overlap : 30% |
| Additions | Raft : NO / Brim : NO / Support : NO |
| PRUSA Slicing Settings | Prusa Slicer |
| PRUSA MK3 | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Raft : NO / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extruder | Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm |
| Layer Settings | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50% |
| Infill | Interior Fill Percentage : 15% / Outline Overlap : 30~40% |
| Additions | Raft : NO / Brim : NO / Support : NO |
| Ender Slicing Settings | Cura |
| Quality | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Pattern : Grid |
| Material | Flow : 100% / Retraction Distance : 5.4mm |
| Additions | Raft : NO / Brim : NO / Support : NO |
| CR-10S Pro Slicing Settings | Cura |
| Quality | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Pattern : Grid |
| Material | Flow : 100% / Retraction Distance : 5.4mm |
| Additions | Raft : NO / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
Hi FAB, I wanted to ask you a question. The boat you have printed in the video, is it in 100% scale as it comes in the file or have you enlarged the scale? Thank you!
Bonjour , beau modèle.
Merci
Candle holders should be a bit larger. I was not able to fit any type I have at home. Ended up cutting pieces of it to fit it
Hallo.
Ich würde das Model gerne kaufen aber Ihre Internetseite scheint nicht zu funktionieren.
Ich werde nicht zur Kasse weitergeleitet. :(
Hull Rear A has some hefty overhangs where the candle holder is, but it did manage to finish fine. Not a huge deal since it's inside.
Thanks for your answer.
We've run so many tests that we know it will print flawlessly on almost any 3D printer.
Happy halloween~
Where are the files for the "Hull_Front" and "Sail_Rear_A"? I just purchased this model and the download is missing these 2 files.
Try downloading the file again or using a different unzipping program.
I checked and there is no problem with the file.
Thank you~
Thank you for the quick reply. Not sure what happened with the first download, but downloading the file a second time had all of the files. Thanks....
I've tried to slice the 2 hull sections with Cura, slicer Failed with unexpected Error messages.
using the fab 365 Profile for Ender 3 Pro.
No problem slicing it with a standard .02 any advise is appreciated.
Please try DOWNLOADING the file AGAIN.
I checked now and there is no problem.
Thank you~
Happy halloween~
Where to find the case for LED lights?
There is a structure where an LED candle light can be placed inside the hull.
Thank you~
Happy halloween~
I reckon the sails would look awesome with glow in the dark filament.
That is a good idea!
Thanks!
Happy halloween~
I've tried slicing this with Cura and it keeps erroring out while slicing. Cura V. 5.50
Even if you see an error in Cura, there is no problem with slicing. However, this part has also been modified. If you re-download and slice it there will be no problem.
Thank you~
I managed to slice that part with Simply 3D with the old version of the STL file. I am still having the same error with Fab365_Ghost_Ship_Hull_Rear_B.stl.
It is still giving me the "Slicing failed with an unexpected error" message with Cura 5.50 (and 5.40) with the updated Fab365_Ghost_Ship_Hull_Front.stl.
Please try downloading the file again.
I checked now and there is no problem.
Happy halloween~
I finally got it to slice by changing some of my Cura settings.
Downloaded package yesterday 31/10.
What settings did you change?
Used settings defined in the comments and so far everything printed ok (Anycubic Kobra). except front hull doesn't wanna slice in cura 5.4.
I moved it on the printplate, spun it 45degr but nothing yet... thx