Roof carrier for VW T1 camper

$ 3.99

Designer

GOODesign

GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.



A few years ago I designed a Volkswagen T1 camper van to store small items on a desk. This design was very popular as my early design.

View VW T1 camper here

Among them, many customers requested that we create a roof that could cover the top of the vehicle so that it could be used as a scale model rather than a container.
I was able to comply with that request this time.

I thought that making only the roof covering was not enough, so I also designed the roof carrier.
It was made in two versions, one made entirely of metal and one partially made of wood.

This design consists of bending and folding a thin frame and attaching it with adhesive. It is very easy to make as long as you check the location of the insertion hole carefully.

Please check the video for more details.

Multi purpose chest with this Roof carrier - Volkswagen T1 Camper Van
Transform your car into a scale model!

Total Build Time : 4h 13m / Plastic Weight : 18.7g

Largest part in printing, size = X 111mm, Y 124mm, Z 4mm, After full assembly size= X 54mm, Y 124mm, Z 23mm

PRUSA Slicing Settings Simplify 3D
Extruder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80%
Infill Interior Fill Percentage : 15% / Outline Overlap : 30%
Additions Raft : NO / Brim : NO / Support : NO
PRUSA Slicing Settings Prusa Slicer
PRUSA MK3 Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Raft : NO / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extruder Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm
Layer Settings Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50%
Infill Interior Fill Percentage : 15% / Outline Overlap : 30~40%
Additions Raft : NO / Brim : NO / Support : NO
Ender Slicing Settings Cura
Quality Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Pattern : Grid
Material Flow : 100% / Retraction Distance : 5.4mm
Additions Raft : NO / Brim : NO / Support : NO
CR-10S Pro Slicing Settings Cura
Quality Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Line Width : 0.4mm
Shell Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6
Infill Infill Density : 20% / Pattern : Grid
Material Flow : 100% / Retraction Distance : 5.4mm
Additions Raft : NO / Brim : NO / Support : NO
File
File 3.6 MB
Release Date
2023-11-10
Average Time
[0.1mm] Wooden_Floor_railing : 10m / 0.5g
[0.1mm] Steel_Floor_railing : 10m / 0.5g
[0.1mm] Main_Frame : 34m / 1.5g
[0.1mm] Steel_Floor : 37m / 2g
[0.1mm] Wooden_Floor : 1h 2m / 4.2g
[0.1mm] Loof : 1h 40m / 10g

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !