Star Destroyer - Starwars
FREE
You can download 1 free item per Free item - download ticket.
GOODesign
GOODesign is a design studio established in Seoul, Korea by a representative who has been active in product design and 3D CG field for 20 years. As a design company that pursues a reasonable and differentiated digital design, it has always presented a new direction through working with clients such as Hyundai Motor, Siemens Korea and beiersdorf. This time, we have put out the life product for 3D printing by utilizing various technique design based on the shape of the Class-A surface. These products are especially the result of deep research on the 3D printing dominant shape that can not be mass-produced using a mold.
Star Destroyer is one of the most voted requests. That's why we have to make it first, but as you all know well, there are too many details to create the Star Destroyer. That's why it takes a lot of work time to express them. It took a long time to prepare for this long work time, and it was finally possible to make it.
The star destroyer I created this time will be sure to impress those around you with its numerous details.
I designed this Star Destroyer using the same approach as my previous Millennium Falcon design. So it's very easy to make.
caution
1. Be sure to remove the support of Hull C left and right parts.
2. The booster on the back is marked with upward and downward directions, so please check and attach it.
3. The location of the main engine deflector has been marked, so please check and attach it.
Please check the video for detailed production process.
It's late, but I'm very happy to answer your request. I hope you enjoy printing the Star destroyer that I put my all into.
I am designing a display stand for an exhibition, so please look forward to it.
1 : 4500 scale
Largest part in printing, Size = X 163mm, Y 168mm, Z 62mm, After full assembly Size= X 238mm, Y 362mm, Z 114mm
Total Build Time : 112h / Plastic Weight : 516g
| PRUSA Slicing Settings | Simplify 3D |
|---|---|
| Extruder | Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm |
| Layer Settings | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 100% / First Layer Width : 100% / First Layer Speed : 80% |
| Infill | Interior Fill Percentage : 15% / Outline Overlap : 30% |
| Additions | Raft : NO / Brim : NO / Support : NO |
| PRUSA Slicing Settings | Prusa Slicer |
| PRUSA MK3 | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Raft : NO / Brim : NO / Support : NO |
| Ender Slicing Settings | Simplify 3D |
| Extruder | Nozzle Diameter : 0.4mm / Retraction Distance : 5.4mm |
| Layer Settings | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 |
| First Layer Settings | First Layer Height : 120% / First Layer Width : 150% / First Layer Speed : 50% |
| Infill | Interior Fill Percentage : 15% / Outline Overlap : 30~40% |
| Additions | Raft : NO / Brim : NO / Support : NO |
| Ender Slicing Settings | Cura |
| Quality | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Pattern : Grid |
| Material | Flow : 100% / Retraction Distance : 5.4mm |
| Additions | Raft : NO / Brim : NO / Support : NO |
| CR-10S Pro Slicing Settings | Cura |
| Quality | Layer Height : 0.1mm(High Quality) or 0.2mm(Low Quality) / Line Width : 0.4mm |
| Shell | Wall Line Count : 2 / Top Solid : 8 / Bottom Solid : 6 |
| Infill | Infill Density : 20% / Pattern : Grid |
| Material | Flow : 100% / Retraction Distance : 5.4mm |
| Additions | Raft : NO / Brim : NO / Support : NO |
Notice !
Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted
did you make it? please write making story !
Write Review
Very happy with the outcome!
This was only my 5th print on the new printer (P1S) and I am just amazed by it.
Printed at 100% in PLA+
longest print time was for the bridge at 5 hrs 40 mins
Hi. Which print is biggest? Then I can upscale.
Printet with 200% now printing the stand
This model is both extremely easy to print and incredibly detailed! I am very happy with the results I got off my Elegoo Neptune Plus and 0.1 layer height with light gray PLA. I would love to see a proper Venator capital ship in the future and I have no doubt it would be equally amazing!
This print came out perfect. Another VERY well designed FAB365 project. I would suggest glueing the front nose to the mid section as there is a bit of play once assembled. I printed my in a white/black PLA from Overture on my X1C with 0.16 layer height. took 26 hours in total as i was able to get the whole thing @ 1:4500 scale onto 2 plates.
I wish i didnt glue in the Hull C Joint cover cylinder as now I can't use the stand! I did make my own simple stand by cutting the Hull C Joint.STL out of a small block. Works but not as pretty as the designed stand for sure.
I printed one piece and it broke at the joints so I do not know what went wrong but I did add support in some parts because it looked like it and I do not know if that is what caused it
Looking forward to a stand for this model.
We released display stand today~
https://fab365.net/items/538
Please enjoy~
Brilliant print! Needs a stand urgently :)
We released display stand today~
https://fab365.net/items/538
Please enjoy~
Printed this Star Destroyer in silk silver PLA. It took me 175 hours; over a week to print. I thought it came out pretty good.
Looking forward to printing. Any plans for lighting cable runs for LEDs?