Store | Gadget

Dongnimmun

$ 4.99

Designer

Voxel Construction

Learning history includes not only the writing of its contents but also lots of relics and historical sites. However, in most of cases people are hard to experience it in person on conditions. And the role of scale model is important to view the whole building, and it is hard to find the very exactly described. This model was made to help such a difficulty of education.

Dongnimmun, which has an important historical meaning, was produced by lots of data that has excellent details. This data was made to be printed out with no support by reflecting the most advantages of 3D printing.

It was made and divided in 4 parts to be easily made by a high coverage desktop type 3D printer, and to be completed by assembling them.

Adhesive is needed for the assembly, and adhesive for paper and wood is recommended. This adhesive takes a long time to dry but once dried it becomes transparent and almost no visible, which allows us to work with it cleanly.

Seoul’s Dongnimmun, which is a building at the latter half of Joseon Dynasty, was first completed on November, 1896 and finished on 1897. It is a gate built on the site, where Yeongeunmun was pulled down, for Independence Club to symbolize that Joseon has been independent from Qing’s investiture system, and that was established by Seo Jaepill. Seo Jaepill’s original as its setting, Afanasy Ivanovich Seredin-Sabatin(Середин-Cабатин, 士巴津, Sabatin) has designed and built it, and its signboard is the work of Kim Gajin.

It was built in the back of Yeongeunmun, which was pulled down as a symbol of Joseon’s epoch against China, and in front of Dongnimmun, there remained the pillars on which Yeongeunmun was stood. It was designated on January 21, 1963 as Korea’s historic site #32.

From this output, I hope you guys to feel the passion of Korea’s independentists in a hard time.

본 출력물의 크기는 폭 167mm x 깊이 95mm x 높이 205mm 로 제작되었다. 축소하여 출력해도 무방하지만 슬라이싱과 출력 과정에서 세부 묘사가 생략될 수도 있음을 고려해야 한다.

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
File
File 17.2 MB
Recommend Print
Makerbot Replicator 5th Gen
Makerbot Replicator 2
Ultimaker 2
Material Color
White
Average Time
81H

Notice !

Feel free to talk about your product.
Comments that are irrelevant to the topic may be deleted

did you make it? please write making story !