The fourth statue series possibly used to a wall decoration. Nefertiti (Nefertiti, NeFeRTiTi, 1370 B.C.- 1330 B.C.) is the queen of Egypt’s 18th pharaoh Akhnaton and the aunt of Tutankhamen. She, who is from Egyptian noble, has glorified the sun god of Aaton like the king. Like the name of its meaning (‘a beauty came’), the limestone bust (collected by Berlin Altes Museum) discovered on 1914 by Amarna has been evaluated as one of the best masterpiece that showed its splendor, and its incomplete head (collected by Egypt museum) also represents well a brilliant beauty of hers. At the end of Akhnaton’s reign, she lost the affection of the king and retired from the palace, but on 1334 B.C. when Akhnaton died and Tutankhamen ascended to the throne, she reigned the country for about 2 years instead of him.

It was transformed in the wall-hanging type for us to watch such a head easily. It is suitable for any place that wants to produce a classical atmosphere (café, wine bar, library, living room and study). Especially it has a high decoration effect if it is hung together with the other head series. And it is good for appreciative side of artwork, and helpful even for studying the Greek mythology.

It is data that needs no post-process without support. However it can be transformed nearly by contraction and it is recommended to print it out by using the less contracting materials (for example PLA) or by applying the suitable adhesive for the printer.

It is not necessary to lower the layer thickness too much to obtain the smooth surface in printing out this statue. In spite of its layer thickness, it gives a feeling of being a patterned marble or a cut tree, so it is better to use the settings that 3D printer of yours prints out best.

If the output is so heavy, it can be fallen down nearly from the wall, and if it falls down, you are concerned to be hurt so it is recommended to set infill low to 15~20% for the output weight to be lighter. And in case of printing it out with the other printer than that of FDM mode(for example, PLA, CJP, SLS etc.), the output can waste materials and be so heavy that is recommend to evacuate the inside by using a proper software.

The size of this product is 128mm (width) x 201mm (length) x 97mm (depth). However, having the bigger printer, you could print it out larger, and having the smaller printer, you could print it out by a proper reduction. Bright colors such as white or ivory color are easy to use, but it looks very nice by printing it out with a black color.